LC01707PLF Datasheet, PDF (1/18 Pages) Sanyo Semicon Device – FM multiple tuner IC

Ordering number : ENA1928A
CMOS LSI
LC01707PLF ^{FM multiple tuner IC}
Overview
LC01707PLF is a vehicle-mounted FM multiple tuner IC with FM-FE, IF, IF-Filter, PLL, FM-DEMO and LPF
incorporated. An FM multiple tuner can be developed with this one chip. It makes up a small-sized FM multiple tuners
which can be mounted on PND.
Functions
• It is the FM tuner IC exclusively for the FM multiple.
• LNA is incorporated
• Image reduction complex BPF is incorporated
• Wide / Narrow Band RF AGC is incorporated
• Narrow Band IF AGC is incorporated
• Image rejection is adopted
• DLL detection method is adopted for the FM detection circuit, and it is not necessary to adjust.
• LPF for the carrier removal is incorporated.
• IC requires fewer external components.
• It is a BUS control tuner IC which can be controlled by controlled by I²C BUS.
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Supply voltage
Maximum input voltage
Maximum output voltage
Power dissipation
VDD max
VDD H
VDD L
Pd max
Ta = 85°C *1
Operating ambient
Topr
Storage temperature
Tstg
Maximum junction temperature Tj max
*1: Board size: 80mm × 70mm × 1.6mm Glass epoxy double-sided board
Ratings
Unit
4.3
V
4.3
V
4.3
V
700
mW
-40 to 85
°C
-55 to 150
°C
150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
O1911 SY/81011 SY 20110210-S00002 No.A1928-1/18