LB1962M Datasheet, PDF (1/7 Pages) Sanyo Semicon Device – Fan Motor Single-Phase Full-Wave Drivers

Ordering number : ENN5657A
LB1862M, LB1962M
Monolithic Digital IC
LB1862M, 1962M
Fan Motor Single-Phase Full-Wave Drivers
Overview
Single-phase full-wave drive design and a compact package
make these ICs optimal for small fans (especially CPU
cooling fans). Low switching noise and effective motor
drive are further advantages. The LB1862M features a
lockup detection output (RD) and the LB1962M features a
rotation detection output (FG).
Package Dimensions
unit: mm
3086A-MFP10S
[LB1862M/LB1962M]
10
6
Features
• Support for 5V/12V dual power supply voltage
• Built-in regenerative circuit allows use of reverse-
connection protection diode
• Built-in Hall amplifier with hysteresis (supports core
without auxiliary electrode)
• Built-in lockup protection and automatic recovery circuits
• Latch-type lockup detection output (RD) is Low during
rotation and High during stop (LB1862M)
• Rotation detection output (FG) (LB1962M)
• Hall bias pin and start/stop pin allow reduced current drain
in standby mode
• Built-in thermal protection circuit
1
5
0.15
5.1
0.35 1.0 0.55
SANYO : MFP10S
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Symbol
Conditions
Maximum supply voltage
Maximum output current
Maximum output withstand voltage
V_CC max
I_OUT max
V_OUT max
(LB1862M)
(LB1962M)
RD/FG maximum output
withstand voltage
RD/FG maximum output current
HB maximum output current
ST maximum input voltage
Allowable power dissipation
V_R max
V_F max
I_R max
I_F max
I_B max
V_ST max
Pd max
(LB1862M)
(LB1962M)
With specified substrate*
Operating temperature
Topr
(LB1862M)
(LB1962M)
Storage temperature
Tstg
*Specified substrate: 114.3 × 76.2 × 1.5 mm³ glass epoxy
Ratings
Unit
17
V
0.5
A
15
V
15
V
15
V
17
V
5 mA
5 mA
10 mA
15
V
850 mW
–20 to +75 °C
–30 to +85 °C
–55 to +150 °C
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
O2599RM(KI) No. 5657-1/7