LB1935T_07 Datasheet, PDF (1/6 Pages) Sanyo Semicon Device – Stepping Motor Driver IC

Ordering number : EN7932D
LB1935T
LB1935CL
Monolithic Digital IC
Stepping Motor Driver IC
Overview
LB1935T/LB1935CL is IC with forward/reverse motor drive 2-channel in which low saturation voltage and low voltage
operation possible. Its small sized package is optimal for 2 phase excitation drive of 2 phase bipolar stepping motors for
various portable devices such as digital still cameras.
Features
• Low saturation voltage, VO(sat) = 0.3V typ at IO = 150mA
• Built-in shoot-through current protection circuit
• No standby current consumption (or zero)
• Built-in thermal shutdown circuit
• MSOP10 small-sized package (3.0mm×4.9mm×1.1mm typ) [LB1935T]
• ECSP2828-10 ultraminiature leadless package (2.8mm×2.8mm×0.8mm typ) [LB1935CL]
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Maximum power source voltage
Applied output voltage
Applied input voltage
GND Pin outflow current
VCC max
VOUT max
VIN max
I GND
OUT1, OUT2, OUT3, OUT4 pin
ENA, IN1, IN2 pin
Per channel
Allowable power dissipation
Pd max
With substrate*
[LB1935T]
Pd max
With substrate*
[LB1935CL]
Operating temperature
Topr
Storage temperature
Tstg
* Specified substrate : 20.0mm×10.0mm×0.8mm, paper phenol
Ratings
Unit
-0.3 to +8.0
V
VCC+VSF
V
-0.3 to +8.0
V
400
mA
400
mW
450
mW
-20 to +75
°C
-40 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
60607 MS IM B8-7254,B8-7758 / 92706 /N3004 TN IM / 91004 JO IM No.7932-1/6