LB1909M Datasheet, PDF (1/4 Pages) Sanyo Semicon Device – Monolithic Linear IC Stepping Motor Driver IC

Ordering number : ENA1338
LB1909M
Monolithic Digital IC
Stepping Motor Driver IC
Overview
The LB1909M is a 2-channel low saturation voltage forward/reverse motor driver that can operate on a wide supply
voltage range (2.5V to 16V). The IC is ideal for use in 2-phase excitation drive of general-purpose 2-phase bipolar stepping
motors including dampers for refrigerators.
Features
• Wide supply voltage range : 2.5V to 16V
• Low saturation voltage : VO(sat) = 0.25V typ at IO = 200mA.
• Built-in shoot-through current protection circuit.
• No standby current consumption (or zero).
• Built-in thermal shutdown circuit.
• Small package : MFP10S (225mil)
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Maximum power source voltage
Applied output voltage
Applied input voltage
GND pin outflow current
Allowable power consumption
VCC max
VOUT max
VIN max
IGND
Pd max
Independent IC
Mounted on the specified board *
Operating temperature
Topr
Storage temperature
Tstg
* Specified board: 114.3mm × 76.1mm × 1.6mm, glass epoxy board.
Ratings
Unit
-0.3 to +20
V
-0.3 to +20
V
-0.3 to +18
V
800
mA
350
mW
870
mW
-30 to +85
°C
-40 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
http://semicon.sanyo.com/en/network
O2908 MS 20081015-S00004 No.A1382-1/4