|
LB1832V Datasheet, PDF (1/7 Pages) Sanyo Semicon Device – Low-Saturation 1.5-Channel 3 V Drive Bidirectional Driver | |||
|
Ordering number : EN4179A
Monolithic Digital IC
LB1832V
Low-Saturation 1.5-Channel 3 V Drive
Bidirectional Driver
Overview
The LB1832V is a bidirectional driver IC that includes an
on-chip low-voltage low-saturation 1.5-channel bridge and
is provided in a miniature package. It is therefore optimal
for cameras that use 3 V lithium batteries. This IC allows
direct drive from the control microprocessor and supports
control of standby, forward, reverse, and braking
operations for two motors, i.e. the film take-up and lens
drive motors, from three inputs.
Features
⢠Supports low-voltage drive.
â When the same power supply is used for VCC and
VS: VCC = VS = 1.6 V min.
â When different power supplies are used for VCC and
VS: VS = 1.0 V min, VCC = 2.5 V min.
⢠Low saturation voltage (Upper side transistor plus lower
side transistor remaining voltage: 0.6 V (typ) at 1 A)
⢠Zero current drain in standby mode
⢠1.5-channel bidirectional driver that can be directly
driven from the control microprocessor
⢠Separate logic and motor power supply connections
⢠Brake function
⢠Built-in spark killer diode
⢠Miniature package (SSOP-24)
Package Dimensions
unit: mm
3175A-SSOP24
[LB1832V]
SANYO: SSOP24
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-0005 JAPAN
41596HA (OT) No. 4179-1/7
|
▷ |