LB1205M_08 Datasheet, PDF (1/3 Pages) Sanyo Semicon Device – High-Voltage, Large-Current Darlington Driver

Ordering number : EN5916A
LB1205M
Monolithic Digital IC
High-Voltage, Large-Current
Darlington Driver
Overview
The LB1205M is a 4-unit, high withstand voltage (65V), large-current (1.5A) Darlington driver array with input low active
configuration and sync output.
Features
• 4-unit, high withstand voltage design (65V), large-current (1.5A) Darlington driver.
• PNP input type (low active).
• On-chip spark killer diodes.
• On-chip input protection diodes.
• Capable of being driven directly from 5V operated CMOS, TTL.
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Output supply voltage
Input supply voltage
Output current
Spark killer diode forward current
Allowable power dissipation
Symbol
VDD max
VCC max
VO max
VIN max
IO max
IFS
Pd max
Operating temperature
Storage temperature
Topr
Tstg
Conditions
VIN ≥ GND
Independent IC
Mounted on the recommended PCB
Ratings
Unit
7.0
V
62
V
65
V
VDD-7.0 to VDD-10.0
V
1.5
A
1.5
A
0.65
W
1.7
W
-20 to +75
°C
-55 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
O0808 MS / 71598RM(KI) No.5916-1/3