LA8161V Datasheet, PDF (1/7 Pages) Sanyo Semicon Device – Monolithic Linear IC AGC Amplifier and Pre Amplifier

Ordering number : ENA0514
Monolithic Linear IC
LA8161V ^{AGC Amplifier and Pre Amplifier}
Overview
The LA8161V is a AGC amplifier for the digital ADC and a pre amplifier for the analog SAW filter.
Features
• V_CC = 5V
• IF Input Frequency Range
• AGC Amplifier Gain
• AGC Gain Reduction
• AGC Amplifier Output Amplitude
30 to 100MHz
49dB
40dB
2Vp-p (differential)
• Pre Amplifier Gain
• Pre Amplifier Output Amplitude
29dB
2Vp-p
Functions
• IF AGC control
• IF AGC amplifier for AD Converter
• Pre Amplifier for SAW Filter
• Function mode switch
Notes : This device is ESD sensitive. So, the device should be treated carefully.
Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Maximum pin voltage
Circuit voltages
Circuit current
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VCC max
V max11
V max
I6
I7
Pd max
Topr
Tstg
Conditions
Pin 3, 4, 14
Pin 11
Pin 8, 9
Pin 6 sink current
Pin 7 sink current
Ta ≤ 70°C
Ratings
Unit
6.0
V
6.5
V
VCC
V
2
mA
2
mA
450*
mW
-20 to +70
°C
-55 to +150
°C
*On the board (114.3×76.1×1.6mm³)
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before usingany SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
N2206 MS PC B8-7843 No.A0514-1/7