LA8153LF Datasheet, PDF (1/7 Pages) Sanyo Semicon Device – Down Converter IC

Ordering number : ENA1485A
LA8153LF
Monolithic Linear IC
For Digital CATV
Down Converter IC
Overview
The LA8153LF is a down converter IC for digital CATV. It accepts RF input frequencies 50MHz to 150MHz.
It has the power save function.
Functions
• RF Mixer
• RF AGC amplifier
• Driver for SAW filter
• IF AGC amplifier
• IF Post amplifier for ADC
• Power save
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Maximum supply voltage
Circuit voltage
VCC max
V max
Pins 3, 6, 17, 18, 27, 28
Pin 11
Allowable power dissipation
Pd max
Ta ≤ 70°C, Mounted on a specified board. *
Operating temperature
Topr
Storage temperature
Tstg
* Specified board: 40mm × 50mm × 0.8mm, FR4, 4 layer, without soldering the Exposed Die Pad to PCB.
Ratings
Unit
3.6
V
VCC
V
750
mW
-20 to +70
°C
-55 to +150
°C
Recommended Operating Conditions at Ta = 25°C
Parameter
Recommended Supply Voltage
Operating Supply Voltage Range
Symbol
VCC
VCC op
Conditions
Pins 3, 6, 17, 18, 27, 28
Pins 3, 6, 17, 18, 27, 28
Ratings
Unit
3.3
V
3.2 to 3.4
V
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
62409 SY / 60309 MS 20090508-S00005 No.A1485-1/7