LA79500E Datasheet, PDF (1/16 Pages) Sanyo Semicon Device – For TV 6-input, 3-output Switch

Ordering number : ENA0259
LA79500E
Monolithic Linear IC
For TV
6-input, 3-output Switch
Overview
This LA79500E is a 6-input, 3-output switch for TV.
Functions
• Composite 6 inputs with 3 outputs
• Component 2 inputs with 2 outputs
• Audio 8 inputs with 3 outputs (L/R)
• Serial control with I²C bus
• General purpose I/O
• Acceptance from Y/C comb filter output
• S1, S2 protocol interface
• Y/C MIX circuit
• All video and audio output Gains are selectable by a single bit as 0 or 6dB.
• Sync-tip clamps include a simple signal detector readable over I²C bus.
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Maximum supply voltage
Allowable current electric power
VCC max
Pd max
* Mounted on a board.
Operating temperature
Topr
Storage temperature
Tstg
* Mounted on a board : 114.3×76.1×1.6mm³, glass epoxy resin.
Operating Conditions at Ta = 25°C
Parameter
Symbol
Recommending supply voltage
Operating supply voltage
VCC
VCC op
Conditions
Ratings
Unit
13
V
1600
mW
-25 to +75
°C
-55 to +150
°C
Ratings
Unit
12
V
11.4 to 12.7
V
■ Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft’s control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
■ SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
N1106 MS PC B8-6323 No.A0259-1/16