LA7793V Datasheet, PDF (1/4 Pages) Sanyo Semicon Device – With Driver amplifier for ADC AGC amplifier

Ordering number : ENA1146
LA7793V
Monolithic Linear IC
With Driver amplifier for ADC
AGC amplifier
Overview
The LA7793V is a AGC amplifier with Driver amplifier for ADC.
It is ideally suited for use with receiver systems receiving QPSK and/or QAM data transmissions.
Functions
• IF AGC control
• IF AGC amplifier
• IF Step Gain Controlled amplifier
• Driver amplifier
• ADC drive capability
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Maximum Supply Voltage
Circuit Voltages
Symbol
VCC max
V max
Conditions
Pins 12, 13 and 14
Pin 11
Circuit Current
I8
Pin 8 sink current
I9
Pin 9 sink current
Allowable Power Dissipation
Pd max
Ta ≤ 85°C *
Operating Temperature
Topr
Storage Temperature
Tstg
* Mounted on specified board: 114.3mm × 76.1mm × 1.6mm, glass epoxy board.
Ratings
7.0
VCC
2
2
360
-40 to +85
-55 to +150
Unit
V
V
mA
mA
mW
°C
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
31208 MS 20061213-S00005 No.A1146-1/4