LA73074CL Datasheet, PDF (1/6 Pages) Sanyo Semicon Device – Monolithic Linear IC Video Driver for DSC/Cell Phone

Ordering number : ENA0910
LA73074CL ^{Monolithic Linear IC}
Video Driver for DSC/Cell Phone
Overview
The LA73074CL is a low voltage drive (2.7V to 3.6V) video driver developed for portable appliances including digital
still cameras and cell phones. It incorporates a minus-voltage generator that allows the LA73074CL to generate its output
with the pedestal voltage set to 0V, so that no output coupling capacitor is required. This enables substantial reduction in
mounting space without concerned about V-sag.
Features
• Output coupling capacity not required
• Low-voltage drive (VCC = 2.7V to 3.6V)
• Νο V-sag
• Sextic LPF incorporated (fc = 7.5MHz)
• Current drain of 0µA in the standby mode
• Amplifier gain selectable from three options (6, 12, and 9dB) (Pin control (GND/Open/VCC))
• Output drive capable of covering maximum 75Ω output, one channel
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Maximum supply voltage
Allowable power dissipation
VCC max
Pd max
Ta ≤ 80°C, *Mounted on a specified board
Operating temperature
Topr
Storage temperature
Tstg
*: Mounted on a specified board: 10mm×20mm×0.8mm, Paper phenol
Ratings
Unit
4.0
V
160
mW
-20 to +85
°C
-55 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
90507 TI IM B8-8589, 8974, 20051226-S00014 No.A0910-1/6