LA73065VA Datasheet, PDF (1/9 Pages) Sanyo Semicon Device – Monolithic Linear IC For wideband 75Ω Video Driver

Ordering number : ENA0887
LA73065VA
Monolithic Linear IC
For wideband
75Ω Video Driver
Overview
This LA73065VA is HD video driver. This IC output Component and RGB. It built in the 12MHz/30MHz-LPF. It is the
best for the filter to remove the digital clock noise of the Component or RGB Analog video signal.
Functions
• Three channel output
• 12MHz or 30MHz low pass filter
• 6dB amplifier
• Output mute
• D_DC_Output
• Standby mode
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VCC max
Pd max
Topr
Tstg
Ta ≤ 75°C *
* : Mounted on a board : 114.3mm×76.1mm×1.6mm, glass epoxy board.
Conditions
Recommended Operating Conditions at Ta = 25°C
Parameter
Recommended supply voltage
Operating supply voltage range
Input pin voltage application range
Symbol
VCC
VCC opg
VIN
Conditions
Ratings
Unit
6.0
V
500
mW
-20 to +75
°C
-40 to +150
°C
Ratings
Unit
5.0
V
4.75 to 5.25
V
-0.3 to VCC opg+0.3
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
80807 MS PC 20070703-S00004 No.A0887-1/9