LA73062V Datasheet, PDF (1/12 Pages) Sanyo Semicon Device – Monolithic Linear IC Video Driver for Wideband

Ordering number : ENA0909
LA73062V ^{Monolithic Linear IC}
Video Driver for Wideband
Overview
The LA73062V is a wideband video output interface. It is ideal as a driver for Composite, S, YPbPr, and RGB analog
video signal outputs.
Incorporating low pass filters (6/12/30MHz), the LA73062V can also serve as a digital clock noise rejection filter.
Functions
• Six channel output
• 6MHz low pass filter (SD) / 12MHz or 30MHz low pass filter (HD)
• 6dB amplifier
• Output mute
• Y/C_MIX
• S_DC_Output
• D_DC_Output
• Standby mode
Specifications
Maximum Ratings at Ta=25°C
Parameter
Symbol
Conditions
Maximum supply voltage
Allowable power dissipation
VCC max
Pd max
Ta≤75°C, Mounted on a circuit board*
Operating temperature
Topr
Storage temperature
Tstg
* Mounted on a specified board: 114.3mm×76.1mm×1.6mm, glass epoxy.
Ratings
Unit
6.0
V
780
mW
-20 to +75
°C
-40 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
82907 TI IM 20070410-S00002 No.A0909-1/12