LA73033M Datasheet, PDF (1/24 Pages) Sanyo Semicon Device – Monolithic Linear IC I2C bus control (excluding standby control and RGB through control)

Ordering number : ENA0646
LA73033M
Monolithic Linear IC
I²C bus control (excluding standby
control and RGB through control)
Overview
This LA73033M is DVD recorder video signal input SW & output driver.
Functions
[SW side]
• Composite signal five-input SW and S signal three-input SW
• Keyed clamp
• Component signal or RGB signal 1 input
• 0dB/ 6dB amplifier
• AGC amplifier (composite and Y signal only)
• LPF for removal of 13.5MHz clock
• Composite output/ Y output changeover switch
• Compatible with standby (two types)
• C.SYNC & V.SYNC output
[Driver side]
• Six-channel input & six-channel output of composite signal & S signal & component or RGB signal
• Clamp (keyed clamp for Cb and Cr)
• 6dB/ 9dB amplifier amplifier
• LPF for removal of 27MHz/ 54MHz clock
• Output mute (three types)
• 75Ω driver (two drives possible)
• Through changeover of RGB signal from the SW side
• Y/ C-MIX
• DC output for S1/ S2
• SCART-RGB/ YC changeover SW
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
71807 TI PC B8-7592, No.0646-1/24