LA73031V Datasheet, PDF (1/10 Pages) Sanyo Semicon Device – For DVD Recorder Video Signal Input Switch

Ordering number : ENA0240
LA73031V
Monolithic Linear IC
For DVD Recorder
Video Signal Input Switch
Overview
This LA73031V is a video signal input switch for DVD recorder.
Functions
• Six input switches × one channel
• Five input switches × two channels
• Keyed clamp
• 6dB amplifier
• 6MHz low pass filter
• Video signal detection
• Composite sync output
• Standby mode
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Maximum supply voltage
Allowable power dissipation
VCC max
Pd max
Ta ≤ 75°C ^∗
Operating temperature
Topr
Storage temperature
Tstg
∗ When mounted on a 114.3×76.1×1.6mm³ glass epoxy resin.
Conditions
Recommended Operating Conditions at Ta = 25°C
Parameter
Recommending operation voltage
Operating voltage range
Input pin voltage application range
Symbol
VCC
VCC opr
VIN
Conditions
Ratings
Unit
7.0
V
780
mW
-20 to +75
°C
-40 to +150
°C
Ratings
Unit
5.0
V
4.75 to 5.25
V
-0.3 to VCC opr + 0.3
V
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before usingany SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
71906 MS OT B8-7234 No.A0240-1/10