LA73026AV Datasheet, PDF (1/13 Pages) Sanyo Semicon Device – Double Scart Interface IC

Ordering number : ENA0239
LA73026AV
Monolithic Linear IC
Double Scart Interface IC
Overview
This LA73026AV is a double scart (PAL/SECAM 21pin) interface IC.
Functions
• AV switches
• Changeable Gain AMP
• 6dB AMP + driver
• FSS output
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VCCV max
VCCA max
Pd max
Topr
Tstg
24, 29 pin
14 pin
Ta ≤ 80°C^∗
∗ When mounted on a 114.3×76.1×1.6mm³ glass epoxy board.
Conditions
Operating Conditions at Ta = 25°C
Parameter
Recommending operation voltage
Operating voltage range
Symbol
VCCV
VCCA
VCCV op
VCCA op
24, 29 pin
14 pin
24, 29 pin
14 pin
Conditions
Ratings
Unit
6.0
V
13.0
V
760 mW
-20 to +80
°C
-55 to +150
°C
Ratings
Unit
5.0
V
12.0
V
4.5 to 5.5
V
11.5 to 12.5
V
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before usingany SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
71906 MS OT B8-6889 No.A0239-1/13