LA6583MC Datasheet, PDF (1/5 Pages) Sanyo Semicon Device – Monolithic Linear IC Fan Motor Driver BTL Driver Single-Phase Full-Wave

Ordering number : ENA2034
LA6583MC
Monolithic Linear IC
Fan Motor Driver
BTL Driver Single-Phase Full-Wave
Overview
The LA6583MC is a low-saturation BTL output linear driving motor driver for single-phase bipolar fan motors. It
features quite, low power, high efficiency drive that suppresses reactive current. It is optimal for use in applications that
require miniaturization and low noise, such as CPU cooling fan motors and 5 to 12V electronic game products.
Features
• Single-phase full-wave linear drive with BTL output (gain resistance 1K-360K)
: Most appropriate for consumer appliances power supply and car audio system, namely equipment that requires silence
because this has no switching noise.
• Low-voltage operation possible, with wide operable voltage range (2.8 to 13.8V)
• Low saturation output (Upper + lower saturation voltage: VO sat (total) = 1.1Vtyp, IO = 200mA)
: High coil efficiency with low current drain. IC itself does not generate much heat.
• Lock protection and auto return circuits built-in
• Lock protection signal output (L during rotation, H at stop; open collector output)
• FG output (rotation speed detection output: open collector output)
• Hall bias built-in (VHB = 1.3V)
• Heat protection circuit (Design guarantee)
: When the large current flows because of output short-circuit, raising the IC chip temperature above 180°C, the heat
protection circuit suppresses the drive current, preventing IC burn and breakdown.
• Compact and high heat capacity package
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
31412 SY 20120127-S00001 No.A2034-1/5