LA6393M_11 Datasheet, PDF (1/6 Pages) Sanyo Semicon Device – For Parallel Comparator Circuits High-Performance Dual Comparator

Ordering number : EN1103F
LA6393M
Monolithic Linear IC
For Parallel Comparator Circuits
High-Performance
Dual Comparator
Overview
The LA6393M is a high-performance dual comparator that is capable of operating from a single power supply over a wide
range of 2V to 36V. Because of its excellent input characteristics and low power, it can be very conveniently applied to
multi-signal parallel comparator circuits that require high-density assembly.
Features
• Wide operating supply voltage range: 2.0 to 36.0V (single voltage supply), ±1.0 to 18.0V (dual voltage supply)
• Wide common-mode input voltage range: 0 to VCC-1.5V
• Open collector outputs allow the use of wired OR circuits
• Low current drain for low-power operation (0.6mA)
• Miniature flat package supports product miniaturization
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Differential input voltage
Common-mode input voltage range
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VCC max
VID
VICM
Pd max
Topr
Tstg
Conditions
Independent IC
Ratings
Unit
36
V
36
V
-0.6 to +36
V
300
mW
-30 to +85
°C
-55 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
O2611 SY/51910 SY/91708 MS/40500TN (KT)/7097KI/4235MW/7282 No.1103-1/6