LA6393JM Datasheet, PDF (1/5 Pages) Sanyo Semicon Device – High-Performance Dual Comparator

Ordering number : ENA0303
LA6393JM
Monolithic Linear IC
High-Performance Dual
Comparator
Overview
The LA6393JM is a high-performance dual comparator that is capable of operating from a single power supply over a wide
range of 2V to 36V. Because of its excellent input characteristics and low power, it can be very conveniently applied to
multi-signal parallel comparator circuits that require high-density assembly.
Functions
• High-performance dual operational amplifier
• Wide supply voltage range (Single supply : 2.0 to 36.0V,dual supplies : ±1.0 to 18.0V).
• Wide common-mode input voltage range (0 to VCC – 1.8V).
• Open collector output enabling wired OR.
• Small current drain (0.6mA) and low power.
• Mini flat package enabling compactness of sets.
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Differential input voltage
Maximum input voltage
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VCC max
VID
VIN max
Pd max
Topr
Tstg
Ta≤25°C
Conditions
Ratings
Unit
36
V
36
V
-0.3 to +36
V
300
mW
-40 to +85
°C
-55 to +150
°C
Recommended Operating Conditions at Ta = 25°C
Parameter
Symbol
Conditions
Supply voltage
VCC
Min
2
Ratings
typ
Unit
Max
24
V
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
92706 / 41006 MS OT 20060410-S00006 No.A0303-1/5