LA6358N_12 Datasheet, PDF (1/7 Pages) Sanyo Semicon Device – High-Performance Dual Operational Amplifiers

Ordering number : EN5234D
LA6358N,6358NS,
LA6358NM,6358NT
Monolithic Linear IC
High-Performance
Dual Operational Amplifiers
Overview
The LA6358 is a high-performance dual operational amplifier that can operate from a single voltage power supply.
It features a built-in phase correction circuit. It can also operate from a dual power supply with both positive and negative
levels and features low power consumption. The LA6358NT can be used in a wide range of industrial applications as a
transducer amplifier for all types of transducers, as a DC amplifier circuit, and for other purposes as well.
Functions
• Eliminates need for phase compensation
• Wide range of operating supply voltage : 3.0V to 30.0V (single power supply)
: ±1.5 to ±15.0V (dual power supply)
• Input voltage swingable down to nearly ground level and output voltage range VOUT of 0 to VCC-1.5V
• Low current dissipation : ICC = 0.5mA typ/VCC = +5V, RL = ∞
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Differential input voltage
Maximum input voltage
Allowable power dissipation
Symbol
VCC max
VID
VIN max
Pd max
Operating temperature
Storage temperature
Topr
Tstg
Conditions
Ta ≤ 25°C LA6358N, 6358NS
Ta ≤ 25°C LA6358NM
Ta ≤ 25°C LA6358NT
Ratings
Unit
32
V
32
V
-0.3 to +32
V
570
mW
300
mW
170
mW
-30 to +85
°C
-55 to +125
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
71410 SY/53007 MS IM / D1306 MS PC B8-4681,B8-7410 No.5234-1/7