LA6324N_12 Datasheet, PDF (1/5 Pages) Sanyo Semicon Device – High-Performance Quad Operational Amplifier

Ordering number : ENN2704C
LA6324N
LA6324NM
Monolithic Linear IC
High-Performance
Quad Operational Amplifier
Overview
The LA6324 consists of four independent, high-performance, internally phase compensated operational amplifiers that are
designed to operate from a single power supply over a wide range of voltages. These four operational amplifiers are
packaged in a single package. As in case of conventional general-purpose operational amplifiers, operation from dual
power supplies is also possible and the power dissipation is low. It can be applied to various uses in commercial and
industrial equipment including all types of transducer amplifiers and DC amplifiers.
Features
• No phase compensation required
• Wide operating voltage range:
3.0 V to 30.0 V (single supply)
±1.5 V to ±15.0 V (dual supplies)
• Highly resistant to dielectric breakdown
• Input voltag range includes the neighborhood of GND level and output voltage range VOUT is from 0 to VCC –1.5 V.
• Small current dissipation:
ICC = 0.6 mA typ/VCC = + 5 V, RL = ∞
Specitications
Absolute Maximum Ratings at Ta = 25 °C
Parameter
Maximum Supply voltage
Differential input voltage
Maximum input voltage
Allowable power dissipation
Symbol
VCC max
VID
VIN max
Pd max
Operating temperature
Storage temperature
Topr
Tstg
Conditions
LA6324N
LA6324NM
Ratings
Unit
32
V
32
V
-0.3 to +32
V
720
mW
330
mW
-30 to +85
°C
-55 to +125
°C
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
92706 / O2504TN(PC)/63096HA(II)/4138TA(KOTO) No.2704-1/5