LA6324NJM Datasheet, PDF (1/5 Pages) Sanyo Semicon Device – High-Performance Quad Operational Amplifier

Ordering number : ENA0290
LA6324NJM
Monolithic Linear IC
High-Performance Quad
Operational Amplifier
Overview
The LA6324NJM is a high-performance quad operational amplifier that can operate from a single voltage power supply.
It features a built-in phase correction circuit. It can also operate from a dual power supply with both positive and negative
levels and features low power consumption. The LA6324NJM is a wide operating temperature range (Topr = -40 to
85°C) allows the device to be used for a wide variety of applications in consumer products as well as industrial
equipment, including automotive applications (excluding critical safety components).
Functions
• High-performance quad operational amplifier
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
Maximum supply voltage
VCC max
32
V
Differential input voltage
Maximum input voltage
VID
VIN max
32
V
-0.3 to +32
V
Output short time *1
Allowable power dissipation
VOshT
Pd max
Ta≤25°C *2
Infinity
sec
330
mW
Operating temperature
Topr
-40 to +85
°C
Storage temperature
Tstg
-55 to +150
°C
*1: 15V or less, only by one arbitrary channel. Moreover,the LA6324NJM must be used under the conditions that its maximum power dissipation(Pd max)
is not exceeded and the following derating factor is observed.
*2: At Ta>25°C,a derating factor of -2.64mW/°C.
Recommended Operating Conditions at Ta = 25°C
Parameter
Symbol
Conditions
Supply voltage
VCC
Ratings
Unit
min
typ
max
3
24
V
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
92706 / 13006 MS OT 20051220-S00011 No.A0209-1/5