LA6242H Datasheet, PDF (1/9 Pages) Sanyo Semicon Device – Four-Channel Bridge Driver for CD Player

Ordering number : EN7814B
LA6242H
Monolithic Linear IC
For CD Player
Four-Channel Bridge Driver
Overview
The LA6242H is a four-channel motor driver IC for home and car CD players. It provides a pin for switching the
channel 1 input.
Functions and Features
• Four bridge-connected (BTL) power amplifier circuits
• I_O max: 1A
• Built-in level shifter circuits
• Muting circuit (on/off control for all outputs)
• High output voltage (dynamic range): 6.5V (typical, channel 1 only)
• Built-in input operational amplifier (channel 1 only)
• Channel 1 input operational amplifier switching function
• Built-in regulator that uses an external PNP transistor and is set by the value of an external resistor.
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
Supply voltage
Allowable power dissipation
V_CCS
VCCP*
Pd max
VCCP1, VCCP2
Independent IC
∗1
14
V
∗1
14
V
0.8
W
Mounted on the specified PCB
∗2
1.8
W
Maximum input voltage
Maximum output current
MUTE pin voltage
Operating temperature
VINB
I_O max
VMUTE
Topr
Each output
13
V
1
A
13
V
-30 to +85
°C
Storage temperature
Tstg
-55 to +150
°C
Note ∗1: All of the power supply pins, V_CCS, VCCP1, and VCCP2, must be connected to the power supply system externally to the IC.
∗2: Mounted on the specified PCB (114.3mm × 76.1mm × 1.6mm, glass epoxy)
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
91207 MS 20070828-S00002 / D2506 MS PC 20060623-S00005 / 81004TN (OT) No. 7814-1/9