LA5632 Datasheet, PDF (1/6 Pages) Sanyo Semicon Device – Multiple Power Supply System Regulator

Ordering number : ENN5998
Monolithic linear IC
LA5632
Multiple Power Supply System Regulator
Overview
The LA5632 is a multiple power supply IC that provides
two 3.3-V regulator circuits as well as two 5-V regulator
circuits. This device is optimal for MD players and similar
applications.
Functions and Features
• Two built-in 3.3-V regulator circuits (I_O = 60 mA,
150 mA)
• Two built-in 5-V regulator circuits (I_O = 1000 mA,
100 mA)
• Power on/off detection circuit included
• The reset circuit operates from the B.BAK voltage.
• The reset circuit current drain is extremely low (3.5 µA
(typical) in backup mode)
Pd max — Ta
14
100 × 100 × 1.5 mm³
12
Package Dimensions
unit: mm
3149A-SIP12H
[LC5632]
27.0
20.0
1
12
2.5
2.0 0.5
1.0
4.0
0.4
2.0
SANYO: SIP12H
10
8
50 × 50 × 1.5 mm³
6.5
6.7
6
4
3.6
Independent IC
2.3
2
1.3
0
–20
0
20
40
60
80
100
Ambient temperature, Ta — °C
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
22500RM (OT) No. 5998-1/6