LA4628 Datasheet, PDF (1/8 Pages) Sanyo Semicon Device – Two-Channel 20 W BTL Audio Power Amplifier

Ordering number : ENN6632
Monolithic Linear IC
LA4628
Two-Channel 20 W BTL Audio Power Amplifier
Overview
Package Dimensions
The LA4628 is a 2-channel general-purpose BTL audio unit: mm
power amplifier provided in a miniature package. It was _{3113A-SIP14HZ}
designed for the best possible audio quality and features
an extended low band roll-off frequency provided by a
[LA4628]
newly-developed NF circuit that does not require an
external capacitor. Furthermore, crosstalk, which can
27.0
4.0
20.0
cause muddiness in the audio output, has been
significantly reduced by both circuit and wiring pattern
improvements. Thus this amplifier can provide powerful
lows and clear highs.
Note that this device is pin compatible with the 13.5 W ×
2-channel LA4625, and allows end products differentiated
by their power rating to share the same printed circuit
board.
Features
• Total output: 20 W + 20 W (at V_CC = 13.5 V, RL = 4 Ω,
THD = 10%)
• High-fidelity design (f_L < 10 Hz, f_H = 130 kHz)
• Extremely low impulse noise levels
• An arbitrary amplifier startup time can be set up with
external components.
• Full complement of built-in protection circuits (includes
circuits that protect against shorting to V_CC, shorting to
ground, load shorting, overvoltages and excessive
temperatures)
1
1.94
0.5
3.56
1.78
3.56
14
0.4
1.6
2.2
SANYO: SIP14HZ
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
92900RM (OT) No. 6632-1/8