LA4182 Datasheet, PDF (1/9 Pages) Sanyo Semicon Device – 2.3 W 2-Channel AF Power Amplifier

Ordering number: EN742G
Monolithic Linear IC
LA4182
2.3 W 2-Channel AF Power Amplifier
Features
. _{Built-in 2 channels enabling use in stereo and bridge}
. ^{amplifier applications.}
High output: 2.3 W/channel, V_CC = 9 V, R_L = 4 Ω, and
. 4.7 W/bridge, RL = 8 Ω.
Minimum number of external parts required : 9 pcs. min.
. (Stereo/bridge).
Small pop noise at the time of power supply ON/OFF due to
built-in muting circuit.
. _{Good ripple rejection ratio due to built-in ripple filter.}
. _{Soft tone at the time of output saturation.}
. _{Good channel separation.}
. _{Voltage gain fixed at 45 dB (Bridge: 51 dB). Variable}
. ^{voltage gain available with external resistor added.}
Easy to design radiator fin.
Package Dimensions
unit : mm
3022A-DIP12F
[LA4182]
SANYO : DIP12F
Specifications
Note) In general applications, heat generated in this package
can be radiated through the Cu-foiled area of the printed
circuit board, but since power dissipation Pd may be
increased depending on the supply voltage and load
conditions, it is recommended to use a fin additionally.
Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
V_CC max
Pd max
Topr
Tstg
Conditions
With signal
Quiescent
With printed circuit board
(Refer to Pd-Ta characteristics)
Ratings
Unit
11
V
15
V
4
W
−20 to +75
°C
−55 to +150
°C
Recommended Operating Conditions at Ta = 25°C
Parameter
Supply voltage
Load resitance
Symbol
V_CC
R_L
Stereo
Bridge
Conditions
Ratings
Unit
9
V
4 to 8
Ω
8
Ω
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
41596HA(II)/O207KI/2146KI/4025KI/O291KI,TS No.742-1/9