LA2335M Datasheet, PDF (1/4 Pages) Sanyo Semicon Device – Monolithic Linear IC For Audio Equipment Control Transceiver IC

Ordering number : ENA0305
LA2335M
Monolithic Linear IC
For Audio Equipment Control
Transceiver IC
Overview
The LA2335M is a transceiver for use in audio equipment control. It was developed as a bus interface driver/receiver IC
for automotive audio equipment.
Features
• Supports both 3.3V and 5.0V I/O controller interface levels.
• Two-input logical OR circuit
• High bus input voltage handling capability (maximum rating : 18V)
• Built-in protection circuits
Functions
• Transmitter (current output driver : 3.8mA (typical))
• Receiver (receiver amplifier, waveshaping hysteresis comparator)
• Standby function
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage (VCC)
Maximum supply voltage (VDD)
Logic input voltage
Bus input voltage
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VCC max
VDD max
Vlgc max
Vbus max
Pd max
Topr
Tstg
Pin 10
Pin 4
Pins 1,2 and 5
Pins 8 and 9
Conditions
Ratings
Unit
7.0
V
7.0
V
VDD+0.3
V
18.0
V
100 mW
-40 to +85
°C
-50 to +125
°C
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
92706 / 40706 MS OT 20060329-S00007 No.A0305-1/4