LA1784M Datasheet, PDF (1/50 Pages) Sanyo Semicon Device – Single-Chip Tuner IC for Car Radios

Ordering number : ENN6039
Monolithic Linear IC
LA1784M
Single-Chip Tuner IC for Car Radios
Overview
The LA1784M integrates all six blocks required in a car
radio tuner on a single chip.
Functions
• FM front end
• FM IF
• Noise canceller
• Multiplex
• AM up-conversion
• FM/AM switch
• MRC
Features
• Improved noise reduction methods
— The FM front end provides excellent 3-signal
characteristics equivalent to those of the LA1193M.
— Superlative listenability due to improved medium and
weak field noise canceller characteristics.
— Improved separation characteristics
— Anti-birdie filter
— Improved AM and FM thermal characteristics
— Excellent FM signal meter linearity
— Modified N.C. circuit for improved noise rejection
• Double conversion AM tuner (up conversion)
Reduces the number of external components required as
compared to earlier double conversion tuners, in
particular, no crystal is required (when used in
conjunction with the LC72144).
• Sample-to-sample variation reduction circuit built into
the FM IF circuit.
(Fixed resistors are used for the SD, keyed AGC, mute
on adjustment, ATT, SNC, and HCC functions.)
• The LA1784 inherits the block arrangement of the
LA1780M and supports pin-compatible designs.
Package Dimensions
Unit:mm
3159-QIP64E
[LA1784M]
17.2
14.0
1.6
1.0 0.8
0.35
1.0
33
48
32
49
0.15
Mounted on a 40 × 80 × 1.3 mm³
glass epoxy printed circuit board
Independent IC
64
1
17
16
0.1
2.7
15.6
0.8
SANYO: QIP64E
Ambient temperature, Ta — °C
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
61501TN (OT) No. 6039-1/50