LA1143 Datasheet, PDF (1/5 Pages) Sanyo Semicon Device – FM IF System for Car Radios

Ordering number : EN1140D
Monolithic Linear IC
LA1143
FM IF System for Car Radios
Overview
The LA1143 is an IF system IC designed for FM car stereo
receivers. It features versatile muting characteristics and
allows receiver designers to realize the muting
performance according to their design concept. Since the
muting characteristics can be varied with a switch or a
semi-fixed resistor, DX-Local switching will be
accomplished with ease.
Package Dimensions
unit: mm
3006B-DIP16
[LA1143]
Functions
• IF amplification/limiter
• AF preamplifier
• Signal meter output
• Muting at detuning
• Quadrature detector
• AFC output
• AGC output
• Muting at small input
SANYO: DIP16
Features
1. Versatile mutings
a) When muting operation is performed under a weak signal strength, an attenuation slope of the audio output against
the input signal strength variations can be set at any given value.
b) Maximum muting attenuation can be selected to be approximately 6 to 40dB.
c) Input signal strength level which actuates the muting circuit can be set freely.
2. High limiting sensitivity (25 dBµ typ. with muting off) provides a good quieting characteristic.
3. High S/N (78dB typ.)
4. Low distortion (0.05% typ.) available, if used with double-tuned circuits.
5. Good AMR (63dB with 6 stages of differential IF amplifiers).
6. Signal meter drive output proportional to the input signal strength in dB (suitable to control multiplex IC LA3373).
7. Clamped (±V_BE) AFC output, bandwidth adjustable.
8. Delayed AGC output for front end circuit.
Equivalent Circuit Block Diagram
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
91297HA (KT)/D157KI/2126KI/5085MW/D142KI, TS No.1140-1/5