LA1061M Datasheet, PDF (1/8 Pages) Sanyo Semicon Device – Antenna Switching Controller

Ordering number : EN3044A
Monolithic Linear IC
LA1061M
Antenna Switching Controller
Overview
The LA1061M is an antenna switching controller for
mobile radio equipment.
The LA1061M uses a number of inputs from the receiver
circuitry to select the main antenna or sub-antenna
according to signal strength and quality. Weak and strong
signals are detected with the S-meter DC voltage and F.E.
AGC voltage, respectively. Multi-path distortion is
detected from the AC component of the IF output, using
the same high-sensitivity counter circuit as in Sanyo's
earlier LA1060 device. An auxiliary circuit keeps the main
antenna selected for a fixed time period when reception
conditions outside a moving vehicle are changing rapidly.
The LA1061M is available in surface-mount 8-pin DIPs,
facilitating construction of compact equipment. It operates
from a single 7 to 12V power supply.
Package Dimensions
unit: mm
3111-MFP14S
[LA1061M]
SANYO: MFP14S
Features
• Uses Sanyo's proprietary AGC amplifier and detector, providing accurate detection of multi-path distortion.
• High-current Main and Sub-antenna switching outputs.
• Antenna switching frequency limiting circuit.
• On-board comparators for F.E AGC (strong signal) and S-meter DC (weak signal) detection.
• Surface-mount 14-pin MFP.
Specifications
Maximum Ratings at Ta=25°C
Parameter
Symbol
Maximum supply voltage
Allowable power dissipation
VCC max
Pd max
Operating temperature
Topr
Storage temperature
Tstg
Maximum flow-out current
I4
I5
I6
I9
I10
I12
Maximum apply voltage
V13
V14
Conditions
Pin 4
Pin 5
Pin 6
Pin 9
Pin 10
Pin 12
Pin 13
Pin 14
Ratings
Unit
14
V
182 mW
–30 to +80
°C
–40 to +125
°C
1 mA
10 mA
10 mA
2 mA
5 mA
2 mA
VCC
V
VCC
V
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
82997HA (KT)/9070TA/6019TA, TS No.3044-1/8