DBF250_10 Datasheet, PDF (1/3 Pages) Sanyo Semicon Device – 25A Single-Phase Bridge Rectifier

Ordering number : EN6567A
DBF250
SANYO Semiconductors
DATA SHEET
DBF250
Diffused Junction Silicon Diode
25A Single-Phase Bridge Rectifier
Features
• _{Glass passivation for high reliability.}
• _{Plastic molded structure.}
• Peak reverse voltage : VRM=200, 600V.
• Average output current : IO=25A.
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Peak Reverse Voltage
Average Output Current
Surge Forward Current
Junction Temperature
Storage Temperature
Dilective Strength Voltage
Tightening Torque
Symbol
VRM
IO
IFSM
Tj
Tstg
Vdis
TOR
Conditions
Tc=98°C, With heatsink
Ta=25°C, Without heatsink
50Hz sine 1cycle peak value
Terminals tc case, AC 1 minute
( ): recommended value
Electrical Characteristics at Ta=25°C Per Constituent element of bridge.
Parameter
Forward Voltage
Reverse Current
Thremal Resistance(Junction-Ambient)
Thremal Resistance(Junction-Case)
Thremal Resistance(Junction-Lead)
Symbol
VF
IR
Rth(j-a)
Rth(j-c)
Rth(j-l)
Conditions
IF=12.5A
VR=At each VRM
Without heatsink
With heatsink
Without heatsink
DBF250C
DBF250G
Unit
200
600
V
➝
25
A
➝
3.5
A
➝
350
A
➝
150
°C
➝
--40 to +150
°C
➝
2.5
kV
➝
0.8(0.5) N•m
Ratings
Unit
min
typ
max
1.05
V
10 μA
22 °C / W
1 °C / W
5 °C / W
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before usingany SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
83006RB MS IM TC-00000159 / 42800 GI IM No.6567-1/3