AM-5812 Datasheet, PDF (1/2 Pages) Sanyo Semicon Device – Amorphous Solar Cell

Ordering number : ENA0058
AM-5812
Package Dimensions (unit : mm)
Overcoat Side
Light Receiving Side
Glass Juts(4 Corners)
Width : 0.6MAX, Length : 6.0MAX
A
47 ^±2
(2.5)
B
47 ^±2
Wire Overcoat
Lead Wires
(6)
59.0^±0.3
52.6^±0.2
(3.2)
Effective Area
Note: Glass Substrate Thickness
Module Thickness
Wire-Overcoat Thickness
Standard lead wires length
: 1.1mm
: 1.3mm max
: 2.5mm max (Including Module)
: 47mm Marking ( A & B )
Ratings at Ta = 25°C
Parameter
Open Circuit Voltage
Short Circuit Current
Operating Voltage & Operating Current
Operating Temperature
Storage Temperature
Symbol
Voc
Isc
Iope
Topr
Tstg
Conditions
SS 50kLx
SS 50kLx
SS 50kLx, Vope=4.0V
AM-1.5, 100mW/cm², Vope=4.0V
SS: Solar Simulator
Ratings
Unit
min
typ
max
6.3
V
8.9
mA
6.7
mA
19.5
mA
-5 to +40 °C
-20 to +70 °C
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
90606 / D1505HKIM No.A0058-1/2