ALP210 Datasheet, PDF (1/2 Pages) Sanyo Semicon Device – Low-Temperature Polysilicon 2.0-inch TFT LCD Module

Ordering number:EN6163
LCD Module
ALP210
Low-Temperature Polysilicon
2.0-inch TFT LCD Module
Overview
This 2.0-inch LCD module is a full-color active matrix
module that uses low-temperature polysilicon thin-film
transistors and includes built-in driver circuits for thin-
frame mounting. The high-resolution and RGB delta dot
arrangement is optimal for use in digital video cameras
and digital still cameras.
Features and Functions
• Display size (diagonal) : 5.1cm (2.0 inches).
• Number of dots : 130,338 dots (557×234 dots).
• RGB delta arrangement.
• Operating ambient temperature : –10 to +60°C.
• Storage ambient temperature : –20 to +70°C.
• Compact design achieved with narrow frames and thin
form factors.
• Support for scan reversal both horizontally and verti-
cally.
• Level shifter circuit built in.
• Support for NTSC/PAL format by using the recom-
mended IC (LV4126W).
• Anti-reflection (AR) coat.
Specifications
Parameter
Specification
Unit
Effective viewing area diagonal
5.1 (2.0-inches)
cm
Effective viewing area dimensions
(horizontal× vertical)
Number of dots
(horizontal× vertical)
Dot pitch
(horizontal× vertical)
40.98× 30.77
mm
557× 234
dot
0.0735× 0.1315
mm
Color arrangement
RGB delta
–
External dimensions
(horizontal× vertical× thickness)
Provisionally 47.9× 39.9× 2.8
(typical)
mm
Note1
Weight
–
g
FPC length
31.6
mm
Note 1. Excluding the FPC and mounting sections.
Package Dimensions
unit:mm
[ALP210]
47.9
40.98
2.8(max3.1)
FPC
22
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
30199RM (KT) No.6163–1/2