SEP1WB1433D Datasheet, PDF (8/12 Pages) Sanken electric – High Luminous Intensity, RoHS compliant

LED Data Sheet - SEP1WB1433D
● Electrostatic discharge.
　InGaN based elements, such as blue LED is generally sensitive to electrostatic discharge.
Therefore, the surge protection diode is connected by reverse in parallel as shown in an internal circuit.
　At this time, in the case of the machine model, the electrostatic discharge of LED is designed to satisfy more
than about 200V. Moreover, in the case of the human model, it is designed to satisfy more than about 2000V.
(These are not guaranteed values.)
　If the voltage is applied in the reverse direction of the LED with the surge protection diode, there is
a possibility that excessive current may flow into the protection diode. Therefore, when you use this LED,
be careful not to impress voltage to the reverse direction of the LED.
Inner circuit
Cathode
LED
Protective
Diode
Anode
　　　　SANKEN ELECTRIC COMPANY, LTD.
Page 8 / 12