STR-Y6763 Datasheet, PDF (1/13 Pages) Sanken electric – Off-Line Quasi-Resonant Switching Regulators

STR-Y6763, STR-Y6765, and STR-Y6766
Off-Line Quasi-Resonant Switching Regulators
Features and Benefits
• TO–220F–7L package
• Lead (Pb) free compliance
• The built-in startup circuit reduces the number of external
components and lowers standby power consumption
• Multi-mode control allows high efficiency operation
across the full range of loads
• Auto burst oscillation mode for standby mode, for
improving low standby power at no load: input power
< 30 mW at 100 VAC and < 50 mW at 230 VAC
• Bottom-skip mode minimizes switching loss at medium to
low loads
▪ Internal MOSFET V_DSS(min) is 800 V
▪ Internal MOSFET R_DS(on)(max) 3.5 Ω (STR-Y6763),
2.2 Ω (STR-Y6765) or 1.7 Ω (STR-Y6766)
• Built-in soft start function reduces stress applied to the
incorporated power MOSFET and peripheral components
• Step-on burst oscillation minimizes transformer
audible noise
• Built-in leading edge blanking (LEB) function eliminates
Continued on the next page…
Description
The STR-Y6763, STR-Y6765, and STR-Y6766 each comprise
a power MOSFET and a multi-functional monolithic integrated
circuit (MIC) controller designed for controlling switch mode
power supplies. The quasi-resonant mode of operation, coupled
with the bottom-skip function, allows high efficiency and low
noise at low to high operational levels, while burst oscillation
mode ensures minimum power consumption at standby.
In order to sustain low power consumption under low load and
in standby mode, the controller has built-in startup and standby
circuits. This enables output power for the STR-Y6763 up
to 50 W with universal input or 80 W with a 380 VDC input,
STR-Y6765 up to 70 W with universal input or 120 W with
a 380 VDC input and for the STR-Y6766 up to 80 W with
universal input or 140 W with a 380 VDC input.
The compact 7-pin full mold package (TO220F-7L) reduces
board space by requiring a minimum of external components,
thus simplifying circuit design. This IC, including various
protection functions, is an excellent choice for standardized,
compact power supplies.
Package: 7-Pin TO-220F
STR-Y6763-DS
Not to scale
Typical Application
VAC
C_V
T1
D2
V_OUT
PC1
C1
R4
P
C5
S
R5
Error Amp
D1 R2
1
3
D/ST ^STR-Y6700 VCC
C2
D
DZ_BD
GND
Controller BD
Chip (MIC) 6
FB/
OLP
5
S/OCP NF
2
7
ROCP
GND
4
R3
C3
PC1
C4 ^CBD
R_BD1
R_BD2
The NF pin (No. 7) should be connected
to the GND pin (No. 4), which should be
at a stable ground potential, to ensure
stability of operation.
SANKEN ELECTRIC CO., LTD.