|
SARS10 Datasheet, PDF (1/7 Pages) Sanken electric – High Efficiency Snubber Diode | |||
|
SARS10
High Efficiency Snubber Diode
Features and Benefits
⪠High Peak Reverse Voltage, VRM : 800 V
⪠Low Forward Voltage, VF : 1.05 V (max.) at IF = 1.0 A
⪠Peak Forward Surge Current, IFSM : 30 A
⪠Average Forward Current, IF(AV) : 1.0 A
⪠Flammability rating UL94V-0 (Equivalent)
⪠Pins Pb (lead) free
⪠Built-in series resistor: 22 Ω
Package: Through Hole
Description
The SARS10 is an 800 V silicon diode designed especially for
use in high-efficiency snubber circuits. This diode can sustain
a high voltage with low loss, with low-noise rectification.
To suppress surge voltage with low noise, conduct the surge
voltage and noise into a capacitor. A series resistor, RS , of 22 Ω
is built into the SARS10, eliminating a external component.
Then allow the capacitor to discharge the energy into power
supply line with the regenerative circuit operation, shown
below in the typical application circuit schematic.
Applications
⪠White goods appliances
⪠Audio-visual equipment
⪠Light fixtures
⪠Communication equipment
⪠Factory automation
Not to scale
Product Structure
Mounting hole
for external
heatsink
Epoxy resin body
Nickel plated copper
leadframe heatsink
Typical Application
Silicon chip
Aluminum
wire bonds
Ceramic on-board
resistor
RS
SARS10
Surge
Voltage
Absorption
Loop
Energy
Discharge
Loop
SARS10-DS
Nickel plated and solder
dipped copper pins
SANKEN ELECTRIC CO., LTD.
http://www.sanken-ele.co.jp/en/
Controller
September 28, 2011
|
▷ |