QMSS Datasheet, PDF (6/7 Pages) Samtec, Inc – QMSS/QFSS High Speed Shielded Terminal 0.635 mm pitch

Product Specification
Series: QMSS/QFSS High Speed Shielded Terminal 0.635 mm pitch
10.0 Multi Connector Processing Placement Limitations – See Following Figures
10.1 When using multiple connectors on a printed circuit board, care must be
taken to ensure proper alignment and the following figures illustrate the placement
limitations for these connectors, but do not take into account the spacing required for
additional components, or automatic placement / rework equipment.
10.2 For applications requiring more than two connectors per board, please
contact Samtec’s Interconnect Processing group at [e-mail]
10.3 Multi Connector processing – Constrained Board Alignment
Constrained Board Alignment-multi connectors processed to Boards
CTE differences between PCB/fixturing during re-flow must be
considered regarding connector locations
© 2004 Samtec, Inc.
Specification: PSQ-005
Checked by: JE
Reviewed by: JET
Approved by: JT
Page 6
Revision: B
Date:2/16/2011