TFM-105-02-S-D-LC-P-TR Datasheet, PDF (2/2 Pages) Samtec, Inc – SMT THROUGH-HOLE HEADER

TFM –125 – 01– L– D –W T
TFM –105 – 01– L– D – RA
TFM –110 – 02 – L– D – DS
TFML–150 – 01– L– D – LC
TFM –110 – 02 – L– DH –W T
(1,27 mm)
.050" pitch
Shrouded body for
blind mating
Surface mount or
Through-hole tails
Screw down
option
Mates with SFM
for coplanar and
perpendicular mating
Weld tab
option
• Passes 10 Year MFG
• Locking option
• Locking clip option
• Weld tab option
• Screw Down option
ROW
OPTION
OPTION
–S
= Single Row
(TFM only)
–D
= Double Row
–DH
= Double Horizontal
(TFM lead style –02 only)
(05 thru 50
positions only)
(–WT standard; –TR
option only available)
(2,26)
.089
–DH
(0,76)
.030
(3,81)
.150
(1,99)
.079
– DS
(–D, –01 & –02 ONLY)
Specify only –RA, –RE1 or –RE2
–RA
= Right Angle
(Lead style –01 only)
–RE1
= Right Angle Elevated for (1,58 mm) .062" PCB
(Requires TFM lead style –01, –D row and –WT)
–RE2
= Right Angle Elevated for (2,36 mm) .093" PCB
(Requires TFM lead style –01, –D row and –WT)
(1,91)
.075
(0,51)
.020
–RA
(1,27)
.050
(6,48)
.255
–RE1 & –RE2
Specify only –A, –LC, –DS or –WT
Not available with –RA, –RE1 and –RE2
unless otherwise noted.
–A
= Alignment Pin
–LC
= Locking Clip
(Manual Placement required)
–DS
= Dual Screw Down for
(1,60 mm) .062" PCB
(05, 07, 10, 15, 20, 25, 30,
35, 40 positions only)
(TFM lead styles –01 and –02 only)
(Requires –D row option)
(Mates with SFM–DS option and
SFSD/SFSDT –SS and –DS option only)
–WT
= Weld Tab
(TFM lead styles –01 and –02 only)
(Standard with –DH)
(Mates to SFSS/SFSD –SR and
–DR option only)
(05, 07, 10, 15, 20, 25, 30, 35,
40, 45, 50 positions only)
SMT lead styles only
Specify only –K or –P
–K
= Polyimide Film Pick & Place Pad
–P
= Plastic Pick & Place Pad
(5 positions minimum)
Specify –TR last
–TR
= Tape & Reel
(Not available with –DS)
APPLICATION
SPECIFIC OPTION
Solder nail option available.
Call Samtec.
WWW.SAMTEC.COM