FSI-110-03-G-D-AD Datasheet, PDF (2/2 Pages) Samtec, Inc – LOW PROFILE & ELEVATED ONE PIECE

FSI–120–06–L–S–AD
FSI–120–03–G–S–AD
Single or
double row
FSI–130–10–L–D–E
Choice of
board stacking
profiles
FSI–150–06–L–D–AD
FSI SERIES
Optional alignment
pins on top and bottom
Short version
or optional
threaded inserts
ROW OPTION
INSERT OPTION
ALIGNMENT
OPTION
OTHER OPTION
–S
= Single Row
(Available with 5, 10 & 20
pins with –AD alignment pin)
–D
= Double Row
Leave blank for Short Version
(No screw down inserts or holes)
–E
= #2-56 x 1/16" screw thread
–M
= 2,00 mm x 0,40 mm screw thread
(71,20) 2.803
(No. of positions x
(1,00) .03937) +
(5,00).197
Insert Option (50 pins/row)
(4,60)
.181
(5,30)
.209
(0,87)
.034
(1,25)
.049
01
05
(0,36) .014
–03, –06 & –10
Contact Detail
A
Short Version
(1,60)
.063
A
–03–AD Shown
Single Row Version –03, –06, –10
(1,40)
.055
(2,25)
.089
–WT Option
(–06 & –10 Body only)
Leave blank for
no Alignment Pin
– AD
= Alignment Pin
Top & Bottom
– WT
= Weld Tab
(Available with –S row option &
–06 & –10 body height only)
–K
= Polyimide Film Pick & Place Pad
(50 position with threaded insert option only)
–P
= Plastic Pick & Place Pad
(5,08 mm) .200" x (12,45 mm) .490"
(50 not available with –E)
(Not available with –S row option
or –03 body height)
–TR
= Tape & Reel Packaging
(No. of positions x (1,00) .03937)
+ (8,60) .339
(No. of positions x (1,00) .03937)
+ (14,70) .579
Insert Option (10, 20 & 30 pins/row)
WWW.SAMTEC.COM
Due to technical progress, all designs, specifications and components are subject to change without notice.