VHDCR-XX-01-M-RA Datasheet, PDF (1/2 Pages) Samtec, Inc – 8mm RIGHT ANGLE SOCKET ASSEMBLY

REVISION B
DO NOT
SCALE FROM
THIS PRINT
4.68 .184
M2 x 0.4
1.5 kgf MIN TORQUE
6.00 .236
3.50 .138
3.83 .151
C5
1.36 .054
C6
1.15 .045 (TYP)
"H"
"J"
"L"
CL
3.10 .122 MAX
C2
"A"
C3
"B" .10[.004]
C4
"C" 0.05[.002]
("D" POS -1) x 0.80[.0315]
0.80 .031 (TYP)
CL
02
68
0.30 .012
"E"
"F" 0.10[.004]
"G" .15[.006]
CL
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
9.45 .372
VHDCR-XX-01-M-RA
No OF POSITIONS
-36, -50, -68
(TOTAL)
LEAD STYLE
-01
MOUNTING OPTION
-RA: RIGHT ANGLE
PLATING SPECIFICATION
-M: MEDIUM SELECTIVE GOLD:
.000015 GOLD OVER .000050 NICKEL
IN CONTACT AREA, .000100 TIN OVER
.000050 NICKEL ON TAILS
5.20±0.25 .205±.010 ^C1
9.45 .372
1.30^{+- 00..1003} .051^+- _..000014
0.35 .014
01
C5
3.50±0.10 .138±.004
4.33 .171
1.55 .061
2.43 .096
3.70 .146
0.80 .031
3.93 .155
1.40 .055
C11 _{2.62 .103}
2.29 .090
PACKAGING VIEW
VHDCR-68-01-M-RA SHOWN
C7 _{1.20 .047}
C8 _{0.40 .016 (TYP)}
C9 _{0.80 .031 (TYP)}
C10 _{1.20 .047 (TYP)}
NOTES:
1. C REPRESENTS A CRITICAL DIMENSION.
"M" (TYP)
C12
TUBE: PT-1-24-01-155
PLUG: TP-52
TABLE 1
No OF
"A"
POS.
"B"
"C"
"D"
"E"
"F"
"G"
"H"
"J"
"L"
"M"
-36 29.90 [1.177] 18.85 [0.742] 15.50 [0.610] 18 19.55 [0.770] 24.90 [0.980] 29.10 [1.146] 27.15 [1.069] 21.00 [0.827] 16.60 [0.654] 12.80 [0.504]
-50 35.50 [1.398] 24.45 [0.963] 21.10 [0.831] 25 25.15 [0.990] 30.50 [1.201] 34.70 [1.366] 32.75 [1.289] 26.60 [1.047] 22.20 [0.874] 19.20 [0.756]
-68 42.70 [1.681] 31.65 [1.246] 28.30 [1.114] 34 32.35 [1.274] 37.70 [1.484] 41.90 [1.650] 39.95 [1.573] 33.80 [1.331] 29.40 [1.157] 25.60 [1.008]
UNLESS OTHERWISE SPECIFIED,
PROPRIETARY NOTE
DIMENSIONS ARE IN MILLIMETERS. THIS DOCUMENT CONTAINS INFORMATION
TOLERANCES ARE:
DECIMALS
ANGLES
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
.X:
1
.XX: 0.25 [.010]
.XXX: 0.051 [.0020]
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
MATERIAL:
DO NOT SCALE DRAWING
SHEETSCALE: 1.5:1
INSULATOR: VECTRA E130i
CONTACT: PHOS BRONZE
SHELL: NICKEL PLATED ZINC ALLOY
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: [phone] FAX: [phone]
e-Ma il: info @SAMTEC.c o m
c o d e: 55322
DESCRIPTION:
.8mm RIGHT ANGLE SOCKET ASSEMBLY
DWG. NO. _{VHDCR-XX-01-M-RA}
F:\ DWG\ MISC\ MKTG\ VHDCR-XX-01-M-RA-MKT.SLDDRW
BY: BRATCHER 01/14/2005 SHEET1 OF 1