|
TW-08-03-L-D-250-120 Datasheet, PDF (1/1 Pages) Samtec, Inc – THROUGH-HOLE BOARD STACKERS | |||
|
F-217
T Wâ 08 â 09 â F âTâ165 â10 0
T Wâ16 â 0 6 âTâ D â 50 0 â10 0
(2.00 mm) .0787"
TWâ20â03âLâQâ400â085
THROUGH-HOLE BOARD STACKERS
TW SERIES
SPECIFICATIONS
For complete specifications
see www.samtec.com?TW-TH
Insulator Material:
Black Liquid Crystal Polymer
Terminal Material:
Phosphor Bronze
Plating:
Sn or Au over
50 µ" (1.27 µm) Ni
Current Rating:
5.2 A per pin
(1 pin powered per row)
Operating Temp Range:
-55 °C to +105 °C with Tin;
-55 °C to +125 °C with Gold
RoHS Compliant:
Yes
LeadâFree Solderable:
Yes
RECOGNITIONS
For complete scope
of recognitions see
www.samtec.com/quality
Board Mates:
CLT, SQT, SQW, ESQT,
TLE, SMM, MMS
Cable Mates:
TCSD
Specify stacker
height in (0.13 mm)
.005" increments
OTHER SOLUTIONS
Paste In Hole (PIH) processing.
Contact Samtec ASP Group.
ALSO AVAILABLE
(MOQ Required)
⢠Other platings
Contact Samtec.
(2.00 mm)
.0787 pitch
Choice of
one through
six rows
FILE NO. E111594 FILE NO: 090871_0_000
Note: For added mechanical
stability, Samtec recommends
mechanical board spacers be
used in applications with gold or
selective gold plated connectors.
Contact ipg@samtec.com for
more information.
Note: This Series is
non-standard, non-returnable.
Other Solutions
2 mm Shunt
See 2SN Series.
Surface
Mount
See previous page.
Low
Profile
See TMM Series.
Right-
angle
See TMM Series.
Shrouded
Double
Row
See ZLTMM
Series.
TW
NO. PINS
PER ROW
LEAD
STYLE
PLATING
OPTION
ROW
OPTION
STACKER
HEIGHT
TAIL
SPEC
02 thru 50
04
(2.00)
.0787
TYP
01 âS, âD*, âQ
Specify
LEAD
STYLE
from
chart
below.
300
âF
= Gold flash
on post,
Matte Tin on tail
âL
= 10 µ" (0.25 µm)
Gold on post,
Matte Tin on tail
âT
= Matte Tin
No. of
rows
x
(2.00)
.0787
âS
= Single
Row
âD
= Double
Row
âT
= Triple
Row
âQ
= Four
Row
â5
= Five
Row
ââXXXâ
= Stacker
Height
in inches
(0.13 mm)
.005"
increments
ââXXXâ
= Tail Length
in inches
(0.13 mm) .005"
increments
Example: -150
Example: â250 = (3.81 mm)
= (6.35 mm)
.150"
.250"
ââXXXâ
LEAD
STYLE
â 01
â02
â03
OAL
(8.20) .323
(9.60) .377
(13.60) .535
= Polarized
Position
(Specify
position to
be removed)
â04 (14.10) .555
â05 (15.10) .594
â06 (17.10) .673
POST
âT, â5, â6 295
(0.51) .020 SQ
â6
= Six
Row
â07 (19.10) .751
* â08 (21.10) .830
â09 (11.60) .456
â10 (15.60) .614
â11 (10.08) .397
TAIL
STACKER
HEIGHT
See OAL
Chart
(1.27)
.050
MIN
ROW OPTION
âS, âD*, & âQ
* â12 (28.19) 1.110
* Style â08 & â12 = S & D only
STACKER HEIGHT
(3.05) .120 MIN
(0.00) .000 MIN
(2.00) .0787
âT, â5, â6
(4.06) .160 MIN
âS, âD*, âQ
âT, â5, â6
* âD with stacker height greater than (4.06 mm) .160"
will not have standoffs.
WWW.SAMTEC.COM
Due to technical progress, all designs, specifications and components are subject to change without notice.
|