|
TFSD-05-28-H-10.00-T Datasheet, PDF (1/1 Pages) Samtec, Inc – TIGER EYE DISCRETE CABLE ASSEMBLY | |||
|
F-217 SUPPLEMENT (Rev 28FEB17)
TFSD â15 â 30 â G â 05.0 0 â D â NUX
(1.27 mm) .050"
TFSDTâ 05 â 30 â G â 05.0 0 â D â NUS
TFSD, TFSDT SERIES
TIGER EYE⢠DISCRETE CABLE ASSEMBLY
SPECIFICATIONS
For complete specifications
see www.samtec.com?TFSD
or www.samtec.com?TFSDT
Insulator Material:
Black LCP
Contact Material:
BeCu
Plating:
Au over 50 µ" (1.27 µm) Ni
Operating Temp Range:
-10 °C to +80 °C (PVC)
-40 °C to +125 °C (*Teflon®)
Wire:
28 or 30 AWG
RoHS Compliant:
Yes
RECOGNITIONS
For complete scope of
recognitions see
www.samtec.com/quality
Mates with:
SFM, SFC (âTR requires
TFMâWT option),
SFML (âXL end option
required)
Single or
Double
Ended
(1.27 mm)
.050"
pitch
28 or 30
AWG
FILE NO. E111594
ALSO AVAILABLE
(MOQ Required)
⢠Color coded cable
(*Teflon® N/A)
⢠Other plating options
Contact Samtec.
*DuPont⢠Teflon® is a
registered trademark of the
E.I. du Pont de Nemours
and Company or its affiliates.
TYPE
STRIP
POSITIONS WIRE PLATING ASSEMBLED
PER ROW GAUGE OPTION
LENGTH
TFSD
= Double
Row
PVC
Cable
TFSDT
= Double
Row
*Teflon®
Cable
â03, â04,
â05, â07,
â10, â15,
â20, â25,
â40, â50
(Standard sizes)
No. of Positions x
(1.27) .050
+ (2.54) .100
(1.27)
.050
â 30
= 30 AWG
â 28
= 28 AWG
âG
= 10 µ"
(0.25 µm)
Gold on
contact
OPTION PIN CONFIGURATION
T-NUS
Pin 1 to Pin N
T-NDS
Pin 1 to Pin 1
T-NUX
Pin 1 and Pin N-1
T-NDX
Pin 1 to Pin 2
D-NUS
Pin 1 to Pin 2
D-NDS Pin 1 and Pin N-1
D-NUX
Pin 1 and Pin 1
D-NDX
Pin 1 to Pin N
ââXX.XXâ
= Assembled
Length in
Inches
(76.20 mm)
03.00" min. for
âS end option
(82.60 mm)
03.25" min. for
âD, âT, âTF, &
âTR end option
End 1 Notch
(Always Down)
End 1 Notch
(Always Down)
(6.10)
.240
END
OPTION
END 2
OPTION
Requires
âS
= Single Ended
âD, âTF
or âTR
(End 1 Notch
âD
Down).
= Double Ended â NUS
âT
= Transfer End
= Notch up,
straight
âNDS Terminal on End 1
Socket on End 2
= Notch down,
â TF
straight
= Transfer End
with Friction Lock
(â05 & â07 positions
not available.)
âNUX
= Notch up,
crossed
â TR
âNDX
= Transfer End = Notch down,
with Retention Latch crossed
(TFM âWT option
required for mating)
Notes:
For wiring option and pin
position location information,
refer to drawings on web.
Teflon® cable is intended
for crimp only. Contact Samtec
for solderable cable applications.
(14.26)
.562
(6.05)
.238
Assembled
Length
± (3.18)
.125
End 2
Notch
(NDS)
End 2
Notch
(NUS)
End 2
Notch
(NDX)
End 2
Notch
(NUX)
Some lengths, styles and
options are non-standard,
non-returnable.
âNDS
or âNUS
âNDX
or âNUX
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
All parts within this catalog are built to Samtecâs specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
|