TCSD-10-D-12.00-01-N Datasheet, PDF (1/1 Pages) Samtec, Inc – TIGER EYE™ IDC SOCKET CABLE

F-217
(2.00 mm) .0787"
™
•••••••••••••••••••
TCSD
TMM
.26" (6.6 mm)
TIGER EYE^™ IDC SOCKET CABLE
TCSD–08–D–02.00–01–N–R
TCSD SERIES
Mates with:
TMM, TMMH, STMM,
MMT, TW, MTMM, EHT,
ETMM (-SR), ZSTMM
TYPE
STRIP
NO. PINS
PER ROW
END
OPTION
LENGTH
01
PLATING
OPTION
N
OTHER
OPTION
SPECIFICATIONS
For complete specifications
see www.samtec.com?TCSD
Insulator Material:
Black Glass Filled Polyester
Contact:
BeCu
Plating:
Au or Sn over 50 µ" (1.27 µm) Ni
Wire:
28 AWG 7/36 Stranded,
Tinned, Copper with
Gray PVC Insulator
Current Rating (TCSD/STMM):
2.8 A per pin
(1 pin powered per row)
Operating Temp Range:
-40 °C to +105 °C
Lead Size Accepted:
(0.48 mm) .019" to
(0.53 mm) .021"
Contact Resistance:
15 mW
Insertion Depth:
(2.87 mm) .113" to
(3.17 mm) .125"
RoHS Compliant:
Yes
RECOGNITIONS
For complete scope of
recognitions see
www.samtec.com/quality
FILE NO. E111594
ALSO AVAILABLE
(MOQ Required)
• Other sizes
• Other platings
Contact Samtec.
POLARIZING KEY
Specify PK-01-07 for
polarizing key (Available
in wheels of six each).
Also polarizes SMM
Series socket strips.
Note: TCSD Series
assemblies are non-
standard, non-returnable.
–04, –05,
–06, –07,
–08, –10, –12,
–13, –15, –17,
–20, –22, –25
(Standard sizes)
–“XX.XX”
= Assembled Length
Assembled Length
in INCHES (±¹/8")
2 inches minimum
–N
= Notch Polarization
– F ^{= Gold flash on contact}
Leave blank for standard plating:
30 µ" (0.76 µm) Gold on contact area
–S
= Single End
–D
= Double End
–P “XX”
= Position Polarization
01
–SR
= Strain Relief
No. of positions x
(2.00) .0787 + (7.874) .3100
(1.02)
.040
(4.00)
.158
TCSD
= Socket Strip
(3.17)
.125
01
No. of positions x (2.00) .0787 + (4.00) .157
(1.00) .039
02
Specify “XX” as position
number. Same position
will be polarized on
both ends.
1
–B “XX”
= Breakout
Specify “XX” as number of
conductors to be broken out.
(5.08)
.200
(2.00)
.0787
(2.00)
.0787
EJECTOR HEADERS &
LOCKING CLIPS
See TMM Series.
“XX”
5"max.
2"min.
Breakout starts with Number 1
lead indicated by brown wire or
red stripe. Shown on top side.
2
–RW
= Reverse Wiring
• Ejector headers
• Locking clips
• Strain relief option
See EHT Series.
01
02
Blue or black wire
opposite position #1.
3
WWW.SAMTEC.COM
Due to technical progress, all designs, specifications and components are subject to change without notice.
Not available with –O, –M,
–R, –DXX or –BXX
–D “XX”
= Daisy Chain
2"
min.
4" minimum
“XX”
1/8"
Double
Row
Connectors
Outer
Most
(End of
assembly)
4
–R
= Reversed
5
–M
= Middle Reverse
Requires –DXX
5
–O
= Outside Reverse
Requires –DXX
5