|
SEAM8-40-S02.0-S Datasheet, PDF (1/1 Pages) Samtec, Inc – ULTRA-HIGH DENSITY OPEN-PIN-FIELD | |||
|
F-217 (Rev 21APR17)
SEAM8â30âS02.0âSâ06â2âK
SEAM8â20âS02.0âSâ04â2âGPâK
(0.80 mm) .0315"
SEAM8 SERIES
ULTRA-HIGH DENSITY OPEN-PIN-FIELD
SPECIFICATIONS
For complete specifications and
recommended PCB layouts see
www.samtec.com?SEAM8
Insulator Material:
Black LCP
Contact Material:
Copper Alloy
Plating:
Au or Sn over
50 µ" (1.27 µm) Ni
Operating Temp Range:
-55 °C to +125 °C
Current Rating:
1.4 A per pin
(6 adjacent pins powered)
Working Voltage:
220 VAC
RoHS Compliant:
Yes
Lead-Free Solderable:
Yes
RECOGNITIONS
For complete scope
of recognitions see
www.samtec.com/quality
FILE NO. E111594
Board Mates:
SEAF8
Cable Mates:
ESCA
Standoffs:
JSO
Up to 500 I/Os
7 mm and 10 mm
stack heights
Lead-Free solder
charge terminations
4, 6, 8 and
10 rows
HIGH-SPEED CHANNEL PERFORMANCE
SEAM8/SEAF8 @ 7 mm Mated Stack Height
Rating based on Samtec reference channel.
For full SI performance data visit Samtec.com
or contact SIG@samtec.com
39
Gbps
Signal Integrity optimized
Edge Rate® contact
SEAM8
NO. PINS
PER ROW
LEAD
STYLE
PLATING
OPTION
NO. OF SOLDER
ROWS TYPE
OPTION
K
ALSO AVAILABLE
(MOQ Required)
⢠Other pin counts
Contact Samtec.
MATED HEIGHT*
SEAF8
LEAD
STYLE
SEAM8 LEAD STYLE
âS02.0 âS05.0
â05.0 (7.00) .276 (10.00) .394
*Processing conditions will affect
mated height.
â10, â 20,
â 30, â40, â50
(Standard sizes)
NO. OF
ROWS
â 04
â06
â 08
â10
A
(4.30)
.169
(6.30)
.248
(8.30)
.327
(10.30)
.406
âS02.0
= 2 mm
Body
Height
âS05.0
= 5 mm
Body
Height
âL
= 10 µ"
(0.25 µm)
Gold on
contact area,
Matte Tin on
solder tail
âS
= 30 µ"
(0.76 µm)
Gold on
contact area,
Matte Tin on
solder tail
No. of positions x
(0.80) .0315 + (5.84) .230
01
â 04
= Four
Rows
â 06
= Six
Rows
â08
= Eight
Rows
â10
= Ten
Rows
(0.75)
.029
A
06
â2
= Lead-Free
Solder
Charge
â GP
= Guide Post
(âS02.0 lead
style only)
(Mates with
SEAF8-RA-GP)
âK
= Polyimide
film Pick &
Place Pad
LEAD
STYLE
â S02.0
âS05.0
B
(4.54)
.179
(7.54)
.297
Notes:
Patent Pending
Tape & Reel packaging
is standard.
Some sizes, styles and
options are non-standard,
non-returnable.
(0.70)
.028
(1.02)
B
.040
(1.27)
.050
(1.32)
.052 DIA
(1.0.1403)x (.10.5322)
No. of positions x
(0.80) .0315 + (2.56) .101
(0.80)
.0315
SEAM8â30âXXX.XâXâ06â2 SHOWN
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
All parts within this catalog are built to Samtecâs specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
|