S1SS-05-28-GF-07.00-S Datasheet, PDF (1/2 Pages) Samtec, Inc – 1MM CABLE ASSEMBLY

REVISION N
DO NOT
SCALE FROM
THIS PRINT
1.40 .055
2.79 .110
-S: SINGLE END
1.40 .055
5.59 .220
1.40 .055
-D: DOUBLE END
OVERALL LENGTH SUBTRACTORS
0.050±0.040 .0020±.0016
(TYP)
S1SSX-XX-XXX-XX-XX.XX-X-XXX
FEP CABLE OPTION
-T: FEP INSULATION
LEAVE BLANK FOR PVC
(SEE NOTE 8)
No OF POSITIONS
-02, -03, -05, -07, -10, -15, -20
(PER ROW) AVAILABLE AS STANDARD
-02 THRU -20 AVAILABLE AS ASO
WIRE GAUGE (AWG)
-28, -30
COLOR CODE
-C: COLOR CODE WIRE
(SEE TABLE 3, SHEET 2)
LEAVE BLANK FOR STANDARD WIRE
(SEE TABLE 1 )
NOT AVAILABLE WITH S1SST
OPTION
DOUBLE
(MUST BE USED ON -D END OPTION ONLY
& APPLIES TO END 2 HOUSING)
-NUS: NO LATCH, "N" UP, STRAIGHT
-NDS: NO LATCH, "N" DOWN, STRAIGHT
END OPTION
-S: SINGLE END
-D: DOUBLE END
ASSEMBLIED LENGTH
(SPECIFY IN INCHES)
01.80 IN MINIMUM
PLATING SPECIFICATION
-T: TIN PLATING
-GF: 3u" MIN Au/50u" Ni
IN CONTACT AND TAIL
'B'
5.00 .197 REF
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
DETAIL 'A'
SCALE 12 : 1
2.80 .110 REF
01
'A'
02
1.03 .040
"D"
C
"A" "B"
"C"
REF REF REF
C-309-01-XX
POSITION 1 INDICATOR
ISS1-02
ASSEMBLED LENGTH ^C
(SEE NOTE 4)
FIG 1
S1SS-02-30-XX-XX.XX-S SHOWN
DWCX-XX-XX-XXX
NOTES:
SEE NOTE 6
DETAIL 'B'
SCALE 8 : 1
1. ^C REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: SIGNAL: 6.6N[1.5 LB]
3. PARTS TO BE PACKAGED IN BAG.
4. FOR ASSEMBLIED LENGTHS LESS THAN 13.00 IN, TOLERANCE SHALL BE
± .125[3.18], FOR OTHER LENGTHS, TOLERANCE SHALL BE ± 2%.
5. REFER TO CRIMP SPECIFICATIONS FOR CRIMP AND STRIP DIMENSIONS,
TOLERANCES, TOOLING, AND ITS REQUIREMENTS.
C 6. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS IN PLACE.
C
7.
ALL FINISHED GOODS ARE TO BE ELECTRICALLY TESTED INCLUDING HI-POT TEST AT
1000 VOLTS DC. AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY WITH (1)
ET STAMP ON THE BODY.
8. SINGLE ENDED ASSEMBLIES USING THE FEP OPTION ARE FOR CRIMP APPLICATIONS ONLY.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
DECIMALS
ANGLES
X.X: 0.3 [.01]
2
X.XX: 0.13 [.005]
X.XXX: 0.051 [.0020]
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 6:1
INSULATOR: PPA UL 94-V0, COLOR: BLACK
CONTACT: PHOS BRONZE
C:\EnterpriseVault\DWG\MISC\MKTG\S1SSX-XX-XXX-XX-XX.XX-X-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: [phone] FAX: [phone]
e-Mail [e-mail]
code 55322
DESCRIPTION:
1MM CABLE ASSEMBLY
DWG. NO.
S1SSX-XX-XXX-XX-XX.XX-X-XXX
BY: VICKY Z 04/13/2010 SHEET 1 OF 2