QSH-090-01-L-D-A Datasheet, PDF (1/3 Pages) Samtec, Inc – .5mm DOUBLE ROW HS SOCKET ASSEMBLY

REVISION AA
FIG. 1
-LC: LOCKING CLIP OPTION SHOWN
DO NOT
SCALE FROM
THIS PRINT
C3
((No OF POSITIONS / 30) x .7875[20.003] + "A")
.7875 20.003 (TYP)
29 EQ. SPACES
x .01965[.500]
02
.245 6.22 REF
01
.626 15.89 REF
.036 0.92 REF
.006 0.15 REF
.0550 1.397
"A"
QSH-30-01-D-XX
"A"
.010 0.25 REF
.725 18.42 REF
T-1G2-01-X
((No OF POSITIONS / 30) x .7875[20.003]) + .005[.13]
QSH-XXX-01-X-D-XXX
No OF POSITIONS
-030, -060, -090,
*-120,* -150
(PER ROW)
*SEE NOTE 11
LEAD STYLE
-01: .1280[3.25]
PLATING SPECIFICATION
-F: FLASH SELECTIVE GOLD WITH
MATTE TIN TAILS
(USE C-126-21-F, T-1G2-01-F)
(SEE NOTE 8 & 10)
-L: LIGHT SELECTIVE GOLD WITH
MATTE TIN TAILS
(USE C-126-21-L, T-1G2-01-L)
(SEE NOTE 10)
-H: HEAVY GOLD
(USE C-126-21-H, T-1G2-01-G)
(SEE NOTE 10)
-C: ELECTRO-POLISHED SELECTIVE
(USE C-126-21-C, T-1G2-01-L)
(SEE NOTE 10)
ROW SPECIFICATION
OPTION
-A: ALIGNMENT PINS
(USE QSH-30-01-D-XX-A,
SEE FIG. 2)
-LC: LOCKING CLIPS
(USE LC-08-TM-01)
-GP: GUIDE POSTS
(USE QSH-30-01-D-XX-X-GP)
(SEE FIG. 4, SHEET 3)
(TAPE & REEL FOR -GP, 60 POS MAX)
-K: POLYIMIDE FILM PAD
(USE K-DOT-.325-.450-.005, SEE FIG. 3)
-TR: TAPE & REEL (90 POS MAX)
-FL: FRICTION LOCKS
(SEE FIG. 5, SHEET 3)
(NOT AVAILABLE WITH -GP)
-RT1: RETENTION (MUST USE -A OPTION)
(USE QSH-30-01-D-XX-A-RT1
& SUB-SC-05-01-FF) (SEE FIG. 6, SHEET 3)
(NOT AVAILABLE WITH -LC, -GP, OR -FL)
(NOT AVAILABLE WITH -120 & -150 POS)
-D: DOUBLE (USE QSH-30-01-D-XX)
.150 3.81 REF
No OF BANKS
.285 7.24
REF
.120 3.05 REF
C-126-21-X
C2
SEE TABLE 1
C1
.1280^+- _..00001300 3.251^+- _00..002756
(SEE NOTE 6 & 7)
LC-08-TM-01
.070 1.77 REF
.007 0.18 REF
.2950 7.493 REF
SECTION "A"-"A"
.0375 0.953
REF
NOTES:
1. C REPRESENTS A CRITICAL DIMENSION.
2. NOTE DELETED.
3. CONTACT RETENTION: 8 OZ. MINIMUM.
4. GROUND PLANE RETENTION: 8 OZ. MINIMUM.
5. BURR ALLOWANCE: .0015[.038] MAX.
6. MAX VARIANCE: .002[.05].
7. DIMENSION APPLIES TO CONTACT & GROUND PLANE.
8. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING, -G PLATED GROUND
PLANE CAN BE SUBSTITUTED FOR -F PLATED GROUND PLANE.
9. SUB-SC-05-01-XX RETENTION TO BE 1.0 LBF IN BODY.
10. MAY SUB C-126-01 FOR C-126-21.
11. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS, PLEASE
CONTACT SAMTEC INTERCONNECT PROCESSING GROUP.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
.XX: .01[.3]
2
.XXX: .005[.13]
.XXXX: .0020[.051]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
INSULATOR: BLACK LCP
CONTACT & GROUND PLANE: PHOS BRONZE
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: [phone] FAX: [phone]
e-Mail: [e-mail]
code: 55322
DESCRIPTION:
.5mm DOUBLE ROW HS SOCKET ASSEMBLY
DWG. NO. _{QSH-XXX-01-X-D-XXX}
c:\enterprisevault\DWG\MISC\MKTG\QSH-XXX-01-X-D-XXX-MKT.SLDDRW
BY: DEAN P 05/21/1999 SHEET 1 OF 3