QSH-060-01-L-D-A-K Datasheet, PDF (1/4 Pages) Samtec, Inc – .5mm DOUBLE ROW HS SOCKET ASSEMBLY

REVISION AV
DO NOT
SCALE FROM
THIS PRINT
02
.245 6.22
REF
01
C
"A"
.7875 20.003 (TYP)
29 EQ. SPCS
@ .0197 [0.500]
= .571 14.50
(TYP)
.042 1.07
REF
.626 15.89 REF
.006 0.15 REF
"A"
QSH-30-01-D-XX-A
"A"
.725 18.42 REF
T-1G2-01-X
"B" REF
QSH-XXX-01-X-D-XXX
No OF POSITIONS
-030, -060, -090,
*-120, *-150 (PER ROW)
(* = SEE NOTE 11)
LEAD STYLE
-01: .1280[3.25]
PLATING SPECIFICATIONF
(SEE NOTES 8, 10 & 12)
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(USE C126-21-S/T-1G2-01-L)
-F: 3µ" FLASH SELECTIVE IN CONTACT AREA,
MATTE TIN ON TAIL
(USE C126-21-F/T-1G2-01-F)
(SEE NOTE 8)
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
(USE C126-21-L/T-1G2-01-L)
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
(USE C126-21-H/T-1G2-01-G)
-C: 50µ" ELECTRO-POLISHED SELECTIVE GOLD
IN CONTACT AREA, MATTE TIN ON TAIL
(USE C126-21-C/T-1G2-01-L)
OPTION
-A: ALIGNMENT PINS
(USE QSH-30-01-D-XX-A)
(NOT AVAILABLE WITH -LC)
-LC: LOCKING CLIPS
(USE LC-08-TM-01, SEE FIG 2, SHT 2)
(NOT AVAILABLE WITH -A)
(SEE NOTE 13)
-GP: GUIDE POSTS
(USE QSH-30-01-D-XX-X-GP)
(SEE FIG 4, SHT 3)
(TAPE & REEL FOR -GP, -060 POS MAX)
-K: POLYIMIDE FILM PAD
(USE K-DOT-.325-.450-.005, SEE FIG 3, SHT 2)
-TR: TAPE & REEL (-090 POS MAX)
-FL: FRICTION LOCKS
(SEE FIG 5, SHT 3)
(NOT AVAILABLE WITH -GP)
-RT1: RETENTION (MUST USE -A OPTION)
(USE QSH-30-01-D-XX-A-RT1
& SUB-SC-05-01-FF, SEE FIG 6, SHT 4)
(NOT AVAILABLE WITH -LC, -GP, OR -FL)
(NOT AVAILABLE WITH -120 & -150 POS)
-L: LATCHING
(USE QSH-30-01-D-XX-A-L, SEE FIG 7, SHT 4)
(NOT AVAILABLE WITH -LC, -GP, -FL, OR -RT1)
(NOT AVAILABLE WITH -090, -120, & -150 POS)
.150 3.81 REF
.285 7.24
REF
ROW SPECIFICATION
-D: DOUBLE (USE QSH-30-01-D-XX)
C
.017±.005 0.43±0.13
(SEE NOTE 14)
C
.1280^+- _..00001300 3.251^+- _00..002756
(SEE NOTE 6 & 7)
No OF BANKS
C-126-21-X
(SEE NOTE 12)
.165^+- _..000015 4.19^+- _00..0133
C
.120 3.05 REF
.038 0.95 REF
SEE TABLE 1
C
.064 1.62 REF
.295 7.49
.007 0.18 REF
.105 2.67 REF
SECTION "A"-"A"
SCALE 3 : 1
NOTES:
1. C REPRESENTS A CRITICAL DIMENSION.
.035 0.89 REF
2. NOTE DELETED.
3. CONTACT RETENTION: 8 OZ. MINIMUM.
4. GROUND PLANE RETENTION: 8 OZ. MINIMUM.
5. BURR ALLOWANCE: .0015[0.038] MAX.
6. MAX VARIANCE: .002[0.05].
7. DIMENSION APPLIES TO CONTACT & GROUND PLANE.
8. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
9. SUB-SC-05-01-XX RETENTION TO BE 1.0 LBF IN BODY.
10. MAY SUB C-126-01 FOR C-126-21.
11. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS, PLEASE
CONTACT SAMTEC INTERCONNECT PROCESSING GROUP.
12. FOR -120, -150 POSITIONS USE C-269-11-X. DO NOT SUB C-126.
13. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
14. CHECK ONCE PER BANK ALTERNATING SIDES FOR MULTIPLE BANK PARTS.
FIG 1
-A: ALIGNMENT PIN OPTION
(QSH-090-01-X-D-A SHOWN)
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
DECIMALS
ANGLES
.XX: .01[.3]
2
.XXX: .005[.13]
.XXXX: .0020[.051]
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 3:2
INSULATOR: LCP UL94V-0, COLOR: BLACK
CONTACT & GROUND PLANE: PHOS BRONZE
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: [phone] FAX: [phone]
e-Mail [e-mail] code 55322
DESCRIPTION:
.5mm DOUBLE ROW HS SOCKET ASSEMBLY
DWG. NO. _{QSH-XXX-01-X-D-XXX}
F:\DWG\MISC\MKTG\QSH-XXX-01-X-D-XXX-MKT.SLDDRW
BY: DEAN P 05/21/1999 SHEET 1 OF 4