QMS-052-05.75-L-D-A Datasheet, PDF (1/6 Pages) Samtec, Inc – .635mm DOUBLE ROW TERMINAL STRIP

REVISION AL
"P" REF
(SEE TABLE 5)
.035 0.89
REF
((No OF POS / 26) x .840[21.34]) - .006[0.15] REF
((No OF POS / 26) x .840[21.34]) - .035[.89] REF
C
((No OF POS / 26) x .840[21.34]) - .215[5.46]
.8400 21.336 (TYP)
C
25 EQ SPACES @ .0250[.635]
.1075 2.73
"A"
.009 0.23 REF
"A"
.090 2.29 REF
FIG 1
-05.75 & -06.75 LEAD STYLE
(QMS-052-06.75-X-D-A SHOWN)
((No OF POS / 26) x .8400[21.336]) - .1050[2.667] REF
QMS-XXX-XX.XX-XX-D-XX-XXX-XX
No OF POSITIONS (PER ROW)
-026, -052, -078,-104, * -130
LEAD STYLE (SEE NOTE 9)
-05.75 (SEE FIG 1)
-06.75 (SEE FIG 1)
**-09.75 (SEE FIG 4, SHEET 3)
PLATING SPECIFICATION
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL.
(AVAILABLE ON -05.75 & -06.75 LEAD STYLE ONLY)
-L: 10µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
01
(AVAILABLE ON -05.75 & -06.75 LEAD STYLE ONLY)
-S: 30µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
(AVAILABLE ON -09.75 LEAD STYLE ONLY)
-SL: 10µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
(AVAILABLE ON -09.75 LEAD STYLE ONLY)
02
.069 1.74
REF
ROW SPECIFICATION
-D: DOUBLE
OPTION
-A: ALIGNMENT PIN
-GP: GUIDE POSTS
(SEE FIG 3, SHEET 2)
(AVAILABLE ON -05.75 & -06.75
LEAD STYLES ONLY)
-K: KAPTON PAD
(SEE FIG 2, SHEET 2)
PACKAGING OPTION
-TR: TAPE & REEL PACKAGING
(-026 THRU -078 WITH NO OPTIONS)
(-026 & -052 WITH -GP, -PXX, -RF1, -RT1)
(-026 WITH RF2)
END OPTION
-PC4: POWER COMBO 4 (.062" THICK BOARD)
(SEE FIG 5, SHEET 4)
-PC8: POWER COMBO 8 (.062" THICK BOARD)
(SEE FIG 5, SHEET 4)
-PT4: POWER COMBO 4 (.093" THICK BOARD)
(SEE FIG 5, SHEET 4)
-PT8: POWER COMBO 8 (.093" THICK BOARD)
(SEE FIG 5, SHEET 4)
-RF1: 1 RF POS PER END
(SEE FIG 6, SHEET 5)
-RF2: 2 RF POS PER END
(SEE FIG 7, SHEET 5)
-RT1: 1 RT POS PER END
(SEE FIG 8, SHEET 6)
(-PXX & -RFX NOT AVAILABLE IN
COMBINATION WITH -A, -GP, OR -K)
(END OPTION APPLIES TO BOTH ENDS,
COMBINATIONS ARE NOT AVAILABLE)
(-PXX & -RFX AVAILABLE IN POS
-026, -052, & -078 ONLY)
(-RFX & -RT1 AVAILABLE ON -05.75 LEAD
STYLE ONLY)
(-RT1 AVAILABLE IN -026, -052, -078,
& -104 POS WITH -A OPTION ONLY)
(-PXX AVAILABLE ON -05.75 & -06.75
LEAD STYLES ONLY)
"H" REF ^{(OPTIONS NOT AVAILABLE IN}
(SEE TABLE 5) ^{COMBINATION WITH -PXX OR -RFX)}
* = NOT TOOLED
** = SEE NOTE 10
.040 1.02 REF
.010 0.25 REF
QMSS-26-XX.XX-D-XX-A
(SEE TABLE 5)
T-1G19-XX.XX-L
(SEE TABLE 5)
C
.1150^+- _..00002400 2.921^+- _00..015012
(MEASURED TERMINAL
TO TERMINAL)
* = NOT TOOLED
SEE NOTE 4
NOTES:
1. C REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM BURR ALLOWANCE: .0015
3. MINIMUM PUSHOUT FORCE: SIGNAL: .5 LB, GROUND: 1 LB,
POWER: .5 LB, RF: .5 LB.
4. ALL TERMINALS ON THE -05.75 & -06.75 LEAD STYLES WILL BE SHEARED.
5. MAXIMUM VARIANCE: .002[0.05]
6. DIMENSION APPLIES TO CONTACTS & GROUND PLANE.
7. GROUND PLANE PRESS HEIGHT MUST BE .003[0.08] LESS THAN THE MAXIMUM HEIGHT
OR .001[0.03] GREATER THAN THE MINIMUM HEIGHT OF THE TERMINALS.
8. PARTS TO BE PACKAGED IN TRAYS.
9. LEADSTYLES -10 AND -11 MAY BE SUBSTITUTED IN PART CALLOUT FOR -05.75 AND
-06.75 ACCORDINGLY FOR EXISTING CUSTOMERS ONLY.
10. -09.75 LEAD STYLE -078 AND -104 POSITION AVAILABLE TO EXISTING CUSTOMERS ONLY.
C
"J"
.0040 [0.102]
.0020 [0.051]
(SEE NOTES 5, 6 & 7)
T-1M19-XX.XX-X
(SEE TABLE 5)
C
SEE TABLE 1
(SEE NOTE 6)
SECTION "A"-"A"
SCALE 4.5 : 1
.296±.006 7.52±0.15
.022 0.56 REF
.075 1.91 REF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
.XX: .01[0.3]
2
.XXX: .005[0.13]
.XXXX: .0020[0.051]
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.4
INSULATOR: LCP, UL 94V-0; COLOR: BLACK
TERMINAL & GROUND PLANE:
PHOS BRONZE
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: [phone] FAX: [phone]
e-Mail: [e-mail]
code: 55322
DESCRIPTION:
.635mm DOUBLE ROW TERMINAL STRIP
DWG. NO.
QMS-XXX-XX.XX-XX-D-XX-XXX-XX
F:\DWG\MISC\MKTG\QMS-XXX-XX.XX-XX-D-XX-XXX-XX-MKT.SLDDRW
BY: E.L.S.
10/12/2010 SHEET 1 OF 6