JSO Datasheet, PDF (1/2 Pages) Samtec, Inc – MICRO JACK SCREW STAND-OFF

REVISION A
DO NOT
SCALE FROM
THIS PRINT
PATENT PENDING
SN-01-02
4.76 .187
HEX REF
1.60 .063 REF
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
JSOM-XXXX-XX
BOARD STACK HEIGHT
*-0500, *-0700, *-0800,
*-1100, -1524
* = NOT TOOLED
LEAD STYLE
*-01: PRESS-IN (NOT AVAILABLE FOR -0700,
-0800 & -1524 BOARD STACK HEIGHTS)
-02: THREADED (NOT AVAILABLE FOR -0500
& -1100 BOARD STACK HEIGHTS)
(SEE SHT 2, FIG 3)
3.80 .150
REF
"A"
REF
JSOM-T-X.XX
1.50 .059 HEX REF
INTERNAL HEX
MUST BE
LOCATED AS
SHOWN
6.00 .236 REF
JSOM-B-XX.XX-01
"B"
REF
5.00 .197
HEX REF
4.70 .185
REF
FIG 1
JSOM-0500-01 SHOWN
"C"±0.05[.002]
FIG 2
APPLICATION VIEW
NOTES:
1.
REPRESENTS CRITICAL DIMENSION
2. STANDOFFS TO BE USED WITH 1.57[.062]MIN THICK BOARDS.
3. COMPONENTS ARE TO BE BULK PACKAGED IN SEPARATE BAGS AND SHOULD
NOT LIST INDIVIDUAL COMPONENT QUANTITY ON THE LABEL. ALL COMPONENT
BAGS ARE TO BE PACKAGED IN A LARGER BAG WITH THE FINAL PART NUMBER
QUANTITY OF ASSEMBLIES ON THE LABEL.
4. STANDOFFS ARE DESIGNED 0.15MM LONGER THAN CONNECTOR
STACK HEIGHTS TO ALLOW FOR PROCESSING VARIABLES.
5. TORQUE TO 2.5 – 3.5 IN*LBS TO SECURE FASTENER IN A STATIC ENVIRONMENT
ASSUMING RECOMMENDED BOARD TO BOARD DISTANCES ARE ACHIEVED
WITHOUT DAMAGE TO THE PCB, HARDWARE OR OTHER COMPONENTS.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS
ANGLES
X.X: 0.3 [.01]
2
X.XX: 0.13 [.005]
X.XXX: 0.051 [.0020]
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
STAINLESS STEEL
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: [phone] FAX: [phone]
e-Mail [e-mail] code 55322
DESCRIPTION:
MICRO JACK SCREW STAND-OFF
DWG. NO.
JSOM-XXXX-XX
c:\enterprisevault\DWG\MISC\MKTG\JSOM-XXXX-XX-MKT.SLDDRW
BY: JESSIE W 7/28/2015 SHEET 1 OF 2