FFMD-05-T-06.00-01-N Datasheet, PDF (1/1 Pages) Samtec, Inc – TIGER EYE™ FLAT IDC WIRE CABLES

F-217
FFSD –20 – S –10.0 0 – 01– N
™
(1.27 mm) .050"
•••••••••••••••••••
FFSD –10 – D – 02 .0 0 – 01– N
FFSD SERIES
TIGER EYE^™ FLAT IDC WIRE CABLES
Mates with:
FTS, FTSH, EHF,
SHF, ESHF
SPECIFICATIONS
For complete specifications
see www.samtec.com?FFSD
Insulator Material:
PBT
Contact:
BeCu
Plating:
10 µ" (0.25 µm) Au over 50 µ"
(1.27 µm) Ni on contact area;
Sn over 50 µ" (1.27 µm) Ni
on balance
Wire:
30 AWG
Current Rating (FFSD/FTSH):
2.3 A per pin
(1 pin powered per row)
Operating Temp Range:
-40 °C to +105 °C
Lead Size Accepted:
(0.41 mm) .016" SQ
Contact Resistance:
15 mW
Insertion Depth:
(2.64 mm) .104" to
(3.17 mm) .125"
RoHS Compliant:
Yes
RECOGNITIONS
For complete scope of
recognitions see
www.samtec.com/quality
FILE NO. E111594
TYPE
STRIP
NO. PINS
PER ROW
END
OPTION
OVERALL
LENGTH
01
–04, –05,
–06, –08,
–10, –11,
–12, –13,
–15, –17,
–20, –25
(Standard sizes)
–S
= Single End
–D
= Double End
–“XX.XX”
= Assembled Length
Assembled Length
in INCHES (1/8")
2 inches minimum
FFSD
= Socket Strip
(1.90) .075
(1.02)
.040
01
(3.05)
.120
No. of positions x
(1.27) .050 + (4.19) .165
(5.08)
.200
(1.27)
.050
N
OTHER
OPTION
–N
= Notch
Polarization
Notch option
(Not available
with -04 position)
ALSO AVAILABLE
(MOQ Required)
• Other sizes
Contact Samtec.
Note: This Series is
non-standard, non-returnable.
–RW= Reverse
Wiring
–
D
“XX”⁼
Daisy
Chain
– R ^{= Reverse}
–O⁼
Outside
Reverse
–SR⁼
Strain
Relief
01
02
Red wire opposite
position #1.
(50.8 mm)
2.00
min.
“XX”
± 1/8"
(101.60 mm) 4.00 min.
3
–M⁼
Middle
Reverse
Requires –DXX ₃
(Mates only with
ESHF Series)
No. of positions x
(1.27) .050 + (8.00) .315
Requires –DXX
• Strain relief option
Not available with
–O, –M, –R or –DXX
1
2
3
WWW.SAMTEC.COM
Due to technical progress, all designs, specifications and components are subject to change without notice.